API_SysAdm3-IAM_JNDI_07202026_CORA.docx
*** | SUPPLEMENTAL LABOR MANAGEMENT OFFICE
ADDITIONAL PROCUREMENT INFORMATION (API)
Title & Level
System Administrator 3
Work Group Location
Portland, OR
Specialty
Identity and Access Management
Offsite Work Eligibility*
Routine Telework Eligible
Organization
JNDI
Number of Days Onsite
2 days per week
Hours
Full-Time, up to 40 hours
Additional Information
Routine telework will be available after an initial training period and at the manager s discretion.
Overtime
5% anticipated
On-Call
Yes regular rotation one-to-three
Travel
N/A
FN Status
NOT open to Foreign Nationals
* Current telework, remote work and onsite support is based on BPA s business needs and is subject to change or termination at any time.
** Assignments with the Remote Designation must reside in WA, OR, ID or MT. Case-by-case exceptions may apply only when in the best interest of BPA.
OVERVIEW
Assignment
This full-time, contract Systems Administrator 3 assignment will provide high-level support to Converged Infrastructure (JNDI) organization within the IT department at *** (BPA). This assignment will serve on the Identity and Access Management (IAM) team supporting Access Control and Remote Access administration in a Windows server environment. Access Administration support is performed using a combination of Active Directory Users and Computers (ADUC), PowerShell scripts, and Windows Workflow management tools, following the Role Based Access Control (RBAC) model where accounts are placed into defined security groups, i.e., best practices for least privilege access. This System Administrator will also perform routine systems administration tasks (i.e., testing, configuring, migrating, upgrading, patching, enhancing, documenting, validating security compliance).
Organization
This System Administrator 3 assignment will work within the Converged Infrastructure (JNDI) organization within Data Center Services (JND) subgroup within the Infrastructure Services (JN) group in the Information Technology (J) business line of *** (BPA). The JNDI organization provides storage, compute, virtualization, virtual desktop, authentication and authorization services as a part of the greater JN infrastructure services group. JND also augments facilities support for the production data centers.
ASSIGNMENT RESPONSIBILITIES
Note: All official drafts, documents and recommendations, as listed below, must be reviewed, finalized and approved / accepted by appropriate BPA manager or other federal personnel with the authority to do so.
As directed by the BPA manager, act as the JNDI point of contact (POC) for access administration in support of the Help Desk ticketing and/or incident management requests for permissions to applications, files, and servers, via membership in security groups.
Support the creation, deletion, and maintenance of security groups and their related memberships in the BPA domains.
Support Microsoft Active Directory by verifying security groups with IO, ISO, and Delegates, converting security groups to new Role Based Access Control (RBAC) methods, and migrating security groups as requested.
Provide Microsoft Windows Active Directory support in the administration of directory maintenance and tasks.
Provide automations for Identity and Access Management workflows:
Collaborate and work with internal organizations to assist with assessing, identifying, documenting, and recommending automated Identity and Access Management (IAM) workflows.
Present or support presentation of possible automation for IAM workflows to appropriate BPA management.
Develop /draft documentation to support the BPA management-approved workflows and automation, capturing necessary workflow adjustments for all changes and enhancements.
Maintain and administer IT systems software, applications software, and all configurations, as they pertain to the IAM program.
This work includes tasks for system upgrades, patches, and enhancements and other changes.
Provide remote administration services which includes:
Remote Access (RSA) account creation, deletion, workflow processes and management, and connectivity issues.
RSA Authentication software testing, configuration, installation, implementation, and troubleshooting
Supporting load balanced RSA servers
Facilitating RSA security activities, reporting, and maintenance of RSA Authentication Tokens.
Support for YubiKey
Provide technical expertise to Help Desk regarding calls related to Identity Management, Remote Access, and Account Administration.
Resolve client service problems and disruptions related to access control problems.
As directed, collaborate with vendor technical resources to resolve issues not resolved by the (IAM) Support team.
Provide required documentation for all corrective actions and/or system changes.
Facilitate and participate in IT planning, analytical support, and coordination of technical resources.
Perform analysis of system capabilities:
Develop functional and system requirements.
Complete business process design and workflow.
Verify integration with other modules, system components, and other BPA applications.
Apply and maintain system security documentation and act as point of contact for the BPA Cyber and Physical Security organizations for issues related to Identity Management and Access Control security issues.
Validate IAM security requirements and implementation timelines.
Create requirements documentation; review with user representatives, recommend priorities and obtain user signoff.
Collaborate with internal users and stakeholders, coordinating interviews and joint requirements planning sessions.
Collaborate with Information System Owners (ISOs) to develop, create, edit, and define system alerts and monitoring requirements.
Provide system administration expertise for special projects, working with internal and external clients and vendors.
Confer with BPA workplace manager or Federal team lead on a routine basis for project status updates and/or any project issues.
Collaborate with BPA s IT Security Office to update, revise, and validate assigned systems compliance with all BPA security requirements.
Provide technical input and recommendations, as a non-voting participant, for potential acquisitions in area of expertise.
Provide systems administration support for any new systems added to BPA s IT infrastructure, assisting with testing, configuration, integration, and implementation efforts,
This work includes developing test plans, implementation schedule, scope, dependencies, documentation, and user training.
Collaborate with BPA s Legal Office to enact Litigation Hold administrative actions.
Confer with BPA workplace manager on a routine basis for status updates and/or any issues or concerns.
Create, develop / draft, and recommend cross-training and functional documentation of subject matter for BPA audiences.
Conduct User training on an individual or group basis as requested.
Training is expected to be infrequent and limited to activities as defined in this API.
Participate in BPA process workshops, including project lessons learned, group improvement, and documentation efforts for procedures, processes, standards, guidelines, practices, and other technical and instructional material.
Mark documents and maintain filing system(s), files, emails, and records in accordance with compliance requirements. Share and disperse documents only to appropriate personnel (those with a Lawful Government Purpose (LGP) to know). Mark and maintain all official records in accordance with the Information Security (INFOSEC) and Information Governance & Lifecycle Management (IGLM) standards and procedures. Validate official records are accurately maintained for auditing purposes.
REQUIREMENTS
Education & Corresponding Experience (required on matrix)
Bachelor s Degree in Computer Science, Information Technology, Engineering, or a related technical field is preferred.
With an Associate s or Bachelor s Degree in applicable fields, 8 years of experience is required.
With an Associate s or Bachelor s Degree not in applicable fields or without a degree, 10 years of experience is required.
Applicable Certifications may count for 1 year of experience.
Experience must include direct work experience in Information Technology performing System Administration.
Required Technical Skills & Experience (required on matrix)
Minimum 2 years of experience with:
Windows Server Tools (such as Active Directory Users and Computers).
Microsoft Entra ID
System administration support for Remote Access Administration.
Assistance in analysis of system capabilities.
Facilitating and delivering system training.
Participating in enterprise information technology planning.
Preferred Skills & Experience (optional on matrix)
Demonstrated experience:
Working in a large production environment.
RSA Security Administration.
YubiKey.
Additional Requirements (not required on matrix)
Valid U.S. Driver s License is required.
Other Assignment Considerations
Provide on-call and backup support for existing systems and functions.
Location for on-call and backup support may be at BPA facilities or off-site.
Appendices
The following appendices apply to this assignment and may be downloaded from the Fieldglass Reference Library:
Offsite Work
Training Expectations (Worker is expected to keep current on the latest technologies and skills required for the assignment.)
Training Type
Details
Provided by
Attendance at all conferences, workshops, training, etc. must be pre-approved by SLMO. Requests will be reviewed on a case-by-case basis. Approval is subject to the most current guidance provided to SLMO by BPA or DOE and is subject to change at any time. SLMO reserves the right to negotiate attendance on billable/non-billable hours and reimbursement of travel costs with the supplier. Reimbursable travel costs must adhere to the Federal Travel Regulations and be submitted via an expense sheet in Fieldglass.
CLOSELY ASSOCIATED RESPONSIBILITIES & REQUIRED ASSOCIATED MITIGATION MEASURES
The following is a list of potential inherently governmental risk areas and the measures that SLMO-Compliance has determined must be in place, via processes and procedures, to mitigate the associated risks. The BPA manager s acceptance of the API or CWSD serves as their attestation that all applicable mitigation measures listed below are or will be established and adhered to in their organization.
Area of potential Closely Associated / Inherently Government function
Mitigation Measures
Access to Confidential / Sensitive Information
CFTE must sign NDA (Non-Disclosure Agreements) at beginning of assignments. (Does not apply to Craft assignments)
CFTE must complete annual Information Security and Privacy Awareness training.
CFTE must complete and pass background investigations of an appropriate level.
Acquisition Planning / Source Selection
CFTE are not permitted to serve as voting members for acquisition selections.
All purchasing decisions must be made by appropriate federal personnel (Contracting Officers).
All acquisition documents (requirements,
SOW s, evaluation criteria, etc.) must be reviewed, finalized and approved by appropriate BPA federal personnel.
Only Contracting Officers are authorized to obligate BPA funds.
Agency / Org Planning
All drafts, documents, materials and recommendations must be reviewed, finalized and approved by appropriate BPA federal personnel.
Budget / Finance Prep
Only Federal Employees may determine budget priorities & allocations.
BFTE must control and finalize / approve all budgets and related documentation, including that for projects, programs and Organizations.
Contract Management
All Contractual documents, including invoices must be finalized / approved by appropriate Federal personnel.
All contract-related decisions (modifications, changes, performance) must be determined by appropriate federal personnel (COs).
Decision Making
CFTE may provide input and recommendations to decision-makers.
Only appropriate federal personnel may make decisions which obligate BPA resources or to a specific course of action.
Direction & Control
(directing BFTE)
CFTE are not permitted to direct the actions of federal employees (BFTE) or have any control or input into their performance.
Work of BFTE must be assigned by federal manager, supervisor, Program / Resource manager or another appropriate designee.
Disposing Govt. Property
All decisions regarding the disposal of BPA property must be made by appropriate federal personnel; and all property dispositions must be directed and controlled by the Investment Recovery Center (IRC).
Dissemination of Agency/Policy Information / Training
All training and any information that is to be disseminated must be either 1) per established policy, process, procedure, or practice; or, 2) reviewed, finalized and approved by appropriate BPA federal personnel.
Inspection / IT Testing
Processes and procedures must ensure Federal personnel review inspection findings and CFTE recommendations before acceptance or rejection of material(s) / item(s).
HR Support
CFTE may assist with HR functions per established procedures, processes and guidelines (e.g., timekeeping).
All work products must be reviewed and finalized by appropriate federal employees.
Policy Development
BPA s process for Policy development includes multiple levels of federal review prior to acceptance / adoption.
Interpretation of Policy/Regulations
Only BPA federal employees may determine the applicability and interpretation of regulations.
CFTE are not permitted to interpret regulations for or on behalf of BPA. Regulations are interpreted by federal personnel and communicated via standards, guides, policies and processes.
Representing BPA
Contract workers are required to identify themselves and their employer in signature blocks, in introductions and have a nameplate outside their cubicle.
CFTE must receive written VP approval to represent BPA at outside events, such as workshops, seminars or conferences.
Page 4 of 4 F_0121_API_TEMPLATE_030626
CFTE NON-CRAFT HIRING SAFETY TRAINING MATRIX
CONTRACT FULL TIME EQUIVALENT (CFTE)
NON-CRAFT HIRING SAFETY TRAINING MATRIX
Purpose:
The Contract Full Time Equivalent (CFTE) Hiring Safety Training Matrix is a hazard assessment for CFTE personnel routine tasks. It is intended to set a common understanding on training requirements between the CFTE personnel and the *** (BPA) managers/supervisors. BPA Requesting Managers should complete this form and coordinate with BPA Supplemental Labor Office during the procurement process to ensure the CFTE position includes a list of required trainings associated with identified tasks, conditions, and exposures. Each task, condition, and exposure indicate which training courses are required, who shall provide those trainings, and when those trainings shall occur.
This form is intended only as a reference document for contractors.
BPA Requesting Manager
(Last, First MI)
Bingaman, Paul R
Date
6/17/2026
CFTE Job Title
System Administrator 3 Identity & Access Management
Org
JNDI
PPE provided by Supplier or Contractor?
Yes No
If yes, list required PPE: Click or tap here to enter text.
Identify which Supplier or Contractor medical surveillance programs are required, if any*
Respirator User
Asbestos
Lead
Silica
Hearing Conservation
Other: Click or tap here to enter text.
No Medical Surveillance
*BPA Requesting Managers may use equivalent Job Title Position Hazard Assessments or project Job Hazard Analyses as indicators for which medical surveillance programs may be required. Direct any questions regarding medical surveillance program requirements to the BPA Industrial Hygienist, ***, or ***.
Instructions for BPA Requesting Manager: This template has been pre-populated with tasks and hazards generally associated with CFTE non-craft positions. BPA Requesting Managers must review this document during the CFTE procurement process. The BPA Requesting Manager will:
Select the checkbox next to each task/condition/exposure that may be encountered during the normal course of the assignment.
Identify if the mitigation for applicable tasks/conditions/exposures will be provided by BPA or the Contractor (supplier).
Indicate when the mitigation must occur (pre-hire, post-hire, pre-task).
Pre-Hire Training should be completed prior to the CFTE starting their assignment.
Post-Hire training should be completed prior to exposure to a hazardous environment and/or conducting work at a BPA worksite.
Pre-Task Training should be completed prior to conducting the associated task.
Once complete, the BPA Requesting Manager will send the completed document to the Supplemental Labor Management Office.
The listed tasks, conditions, and exposures are not all inclusive. New processes, unusual tasks, or equipment may trigger the need for specialized training. Consult with your local Safety Manager or BPA Safety Training Manager for guidance.
BPA provided safety training will be the same training provided to Federal Workers.
For the General Comments section, BPA Requesting Managers can list anything that was not already covered and provide clarification to the BPA COR to better understand the CFTE position. It may include tasks, conditions, and/or exposures that are unique to a particular position, work site, or person.
For more information on the PHA process/requirement, reference the Safety and Occupational Health Manual, Safety Management Systems Chapter.
Direct any questions regarding training requirements or issues related to this form to the BPA Safety Training Manager, ***, or ***.
Office & Remote Work/Telework Hazards
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
Exposed to a fire in the building
BPA manager will advise of evacuation protocol and designated gathering location. Annual fire drills will be conducted.
B
Exposed to an earthquake while in the building
BPA manager will advise of evacuation protocol and designated gathering location.
B
Operating office tools (paper cutter, paper punch, staplers, etc.)
None Identified
Choose an item.
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
Performing tasks that may result in repetitive motion injuries, prolonged sitting and computer use
Optional: SUFS Move Safe (HRMIS 016633)
C
Ergonomics
Recognize the hazards and know when it is appropriate to stretch and take breaks; ensure a proper desk, chair, and equipment adjusted at the appropriate level; ensure proper lighting. Any ergonomic assessment to be provided by the supplier.
C
Performing tasks that may result in slips, trips or falls such as carrying boxes and walking on stairs or slick surfaces
Review SOHM Chapter 9
Choose an item.
Optional: Slips, Trips & Falls Training (HRMIS 015076)
Choose an item.
Adding electronic devices that were not previously part of the home (monitors, chargers, computing equipment, etc.)
None Identified. On-the-job familiarization (if using BPA-issued equipment).
Choose an item.
Travel / Field Operation Hazards
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
Driving vehicles on public and/or non-public roads
Review SOHM Chapter 19
B
Defensive/Distracted Driving (HRMIS 017057)
B
Worker operates forklifts
Forklift Certification
Choose an item.
Worker operates a fire extinguisher
Fire Extinguisher Use
Choose an item.
Worker operates hand tools
None Identified
Choose an item.
Worker uses personal protective equipment
Personal Protective Equipment
Choose an item.
Worker may be exposed to shock and arc-flash hazard
Shock & Arc Flash Awareness
Choose an item.
Shock & Arc Flash Basic
Choose an item.
Shock & Arc Flash Advanced / Refresher
Choose an item.
Worker may contact but will not disturb Asbestos Containing Material (ACM) or Potentially Asbestos Containing Material (PACM) 2
Asbestos Awareness
Choose an item.
Worker required to work in remote areas where bear encounters may take place
Bear Pepper Spray Training
Choose an item.
Worker exposed to rodent and bird droppings1
Biological/Vermin/Hanta Virus
Choose an item.
Worker exposed to hot and/or cold environments
None Identified
Choose an item.
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
Worker exposed to chemicals, such as herbicides or pesticides;
Herbicide Cert. Ref. 4-hr
Choose an item.
Herb Certification 8-hr
Choose an item.
Hazardous Communication
Choose an item.
Worker exposed to lead2
Lead Awareness
Choose an item.
Lead Worker Training
Choose an item.
Worker exposed to mercury
None Identified
Choose an item.
Worker exposed to noise2
Hearing Conservation (Initial)
Hearing Conservation (Annual)
Choose an item.
Worker exposed to silica2
Silica - Awareness
Choose an item.
Worker works at heights higher than 4
Fall Protection, Awareness
Choose an item.
Fall Protection, General
Choose an item.
Fall Protection, Advanced
Choose an item.
Ladder Safety
Choose an item.
Fall Protection, Advanced (TLM)
Choose an item.
Worker is required to take first aid and may be called on to render first aid for: workers on high voltage lines and/or equipment; worker works in remote areas
First Aid/CPR/AED
(Red Cross or AHA Accredited)
Required only if specified in the API
Choose an item.
Worker performs work alone in remote areas
Wilderness Adv. First Aid
Choose an item.
Worker may prepare, transport or receive hazardous materials
DOT 1: Introduction, Classification, and the Hazardous Materials Table
DOT 2: Packaging, Labeling, Marking, and Placarding
DOT 3: Shipping Papers
DOT 4: Loading and Storage
DOT: Security for Shipment of Hazardous Materials
Hazardous Materials: Shipping Lithium Batteries under DOT Exemptions
DOT Hazardous Material Awareness for the General Hazmat Employee
Choose an item.
1 BPA workplace manager to review Hantavirus Prevention Procedure 420-240-1 before performing task.
2 These exposures may require enrollment in a Medical Surveillance Program. Ensure page 1 is marked accordingly.
Other Specific Hazards
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
SAMPLE: Worker may make infrequent visits to field locations or substations
Worker complete the PPE assessment in the SOHM to determine need for PPE such as hard hat, safety glasses, hearing protection, safety vests, Arc Flash clothing or steel-toed boots.
B
X
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
General Comments
BPA Requesting Manager Comments/Additional Considerations:
Click or tap here to enter text.
F_0139_HIRING_SAFETY_TRAINING_MATRIX_121624
CFTE NON-CRAFT HIRING SAFETY TRAINING MATRIX
CONTRACT FULL TIME EQUIVALENT (CFTE)
NON-CRAFT HIRING SAFETY TRAINING MATRIX
Purpose:
The Contract Full Time Equivalent (CFTE) Hiring Safety Training Matrix is a hazard assessment for CFTE personnel routine tasks. It is intended to set a common understanding on training requirements between the CFTE personnel and the *** (BPA) managers/supervisors. BPA Requesting Managers should complete this form and coordinate with BPA Supplemental Labor Office during the procurement process to ensure the CFTE position includes a list of required trainings associated with identified tasks, conditions, and exposures. Each task, condition, and exposure indicate which training courses are required, who shall provide those trainings, and when those trainings shall occur.
This form is intended only as a reference document for contractors.
BPA Requesting Manager
(Last, First MI)
Bingaman, Paul R
Date
6/17/2026
CFTE Job Title
System Administrator 3 Identity & Access Management
Org
JNDI
PPE provided by Supplier or Contractor?
Yes No
If yes, list required PPE: Click or tap here to enter text.
Identify which Supplier or Contractor medical surveillance programs are required, if any*
Respirator User
Asbestos
Lead
Silica
Hearing Conservation
Other: Click or tap here to enter text.
No Medical Surveillance
*BPA Requesting Managers may use equivalent Job Title Position Hazard Assessments or project Job Hazard Analyses as indicators for which medical surveillance programs may be required. Direct any questions regarding medical surveillance program requirements to the BPA Industrial Hygienist, ***, or ***.
Instructions for BPA Requesting Manager: This template has been pre-populated with tasks and hazards generally associated with CFTE non-craft positions. BPA Requesting Managers must review this document during the CFTE procurement process. The BPA Requesting Manager will:
Select the checkbox next to each task/condition/exposure that may be encountered during the normal course of the assignment.
Identify if the mitigation for applicable tasks/conditions/exposures will be provided by BPA or the Contractor (supplier).
Indicate when the mitigation must occur (pre-hire, post-hire, pre-task).
Pre-Hire Training should be completed prior to the CFTE starting their assignment.
Post-Hire training should be completed prior to exposure to a hazardous environment and/or conducting work at a BPA worksite.
Pre-Task Training should be completed prior to conducting the associated task.
Once complete, the BPA Requesting Manager will send the completed document to the Supplemental Labor Management Office.
The listed tasks, conditions, and exposures are not all inclusive. New processes, unusual tasks, or equipment may trigger the need for specialized training. Consult with your local Safety Manager or BPA Safety Training Manager for guidance.
BPA provided safety training will be the same training provided to Federal Workers.
For the General Comments section, BPA Requesting Managers can list anything that was not already covered and provide clarification to the BPA COR to better understand the CFTE position. It may include tasks, conditions, and/or exposures that are unique to a particular position, work site, or person.
For more information on the PHA process/requirement, reference the Safety and Occupational Health Manual, Safety Management Systems Chapter.
Direct any questions regarding training requirements or issues related to this form to the BPA Safety Training Manager, ***, or ***.
Office & Remote Work/Telework Hazards
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
Exposed to a fire in the building
BPA manager will advise of evacuation protocol and designated gathering location. Annual fire drills will be conducted.
B
Exposed to an earthquake while in the building
BPA manager will advise of evacuation protocol and designated gathering location.
B
Operating office tools (paper cutter, paper punch, staplers, etc.)
None Identified
Choose an item.
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
Performing tasks that may result in repetitive motion injuries, prolonged sitting and computer use
Optional: SUFS Move Safe (HRMIS 016633)
C
Ergonomics
Recognize the hazards and know when it is appropriate to stretch and take breaks; ensure a proper desk, chair, and equipment adjusted at the appropriate level; ensure proper lighting. Any ergonomic assessment to be provided by the supplier.
C
Performing tasks that may result in slips, trips or falls such as carrying boxes and walking on stairs or slick surfaces
Review SOHM Chapter 9
Choose an item.
Optional: Slips, Trips & Falls Training (HRMIS 015076)
Choose an item.
Adding electronic devices that were not previously part of the home (monitors, chargers, computing equipment, etc.)
None Identified. On-the-job familiarization (if using BPA-issued equipment).
Choose an item.
Travel / Field Operation Hazards
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
Driving vehicles on public and/or non-public roads
Review SOHM Chapter 19
B
Defensive/Distracted Driving (HRMIS 017057)
B
Worker operates forklifts
Forklift Certification
Choose an item.
Worker operates a fire extinguisher
Fire Extinguisher Use
Choose an item.
Worker operates hand tools
None Identified
Choose an item.
Worker uses personal protective equipment
Personal Protective Equipment
Choose an item.
Worker may be exposed to shock and arc-flash hazard
Shock & Arc Flash Awareness
Choose an item.
Shock & Arc Flash Basic
Choose an item.
Shock & Arc Flash Advanced / Refresher
Choose an item.
Worker may contact but will not disturb Asbestos Containing Material (ACM) or Potentially Asbestos Containing Material (PACM) 2
Asbestos Awareness
Choose an item.
Worker required to work in remote areas where bear encounters may take place
Bear Pepper Spray Training
Choose an item.
Worker exposed to rodent and bird droppings1
Biological/Vermin/Hanta Virus
Choose an item.
Worker exposed to hot and/or cold environments
None Identified
Choose an item.
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
Worker exposed to chemicals, such as herbicides or pesticides;
Herbicide Cert. Ref. 4-hr
Choose an item.
Herb Certification 8-hr
Choose an item.
Hazardous Communication
Choose an item.
Worker exposed to lead2
Lead Awareness
Choose an item.
Lead Worker Training
Choose an item.
Worker exposed to mercury
None Identified
Choose an item.
Worker exposed to noise2
Hearing Conservation (Initial)
Hearing Conservation (Annual)
Choose an item.
Worker exposed to silica2
Silica - Awareness
Choose an item.
Worker works at heights higher than 4
Fall Protection, Awareness
Choose an item.
Fall Protection, General
Choose an item.
Fall Protection, Advanced
Choose an item.
Ladder Safety
Choose an item.
Fall Protection, Advanced (TLM)
Choose an item.
Worker is required to take first aid and may be called on to render first aid for: workers on high voltage lines and/or equipment; worker works in remote areas
First Aid/CPR/AED
(Red Cross or AHA Accredited)
Required only if specified in the API
Choose an item.
Worker performs work alone in remote areas
Wilderness Adv. First Aid
Choose an item.
Worker may prepare, transport or receive hazardous materials
DOT 1: Introduction, Classification, and the Hazardous Materials Table
DOT 2: Packaging, Labeling, Marking, and Placarding
DOT 3: Shipping Papers
DOT 4: Loading and Storage
DOT: Security for Shipment of Hazardous Materials
Hazardous Materials: Shipping Lithium Batteries under DOT Exemptions
DOT Hazardous Material Awareness for the General Hazmat Employee
Choose an item.
1 BPA workplace manager to review Hantavirus Prevention Procedure 420-240-1 before performing task.
2 These exposures may require enrollment in a Medical Surveillance Program. Ensure page 1 is marked accordingly.
Other Specific Hazards
Task / Condition / Exposure
Required Training
Contractor (C) or BPA (B) Provided
Pre-Hire Training
Post-Hire Training
Pre-Task Training
SAMPLE: Worker may make infrequent visits to field locations or substations
Worker complete the PPE assessment in the SOHM to determine need for PPE such as hard hat, safety glasses, hearing protection, safety vests, Arc Flash clothing or steel-toed boots.
B
X
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
Click or tap here to enter text.
Click or tap here to enter text.
Choose an item.
General Comments
BPA Requesting Manager Comments/Additional Considerations:
Click or tap here to enter text.
F_0139_HIRING_SAFETY_TRAINING_MATRIX_121624