| Location | Mounds View, MN |
SUMMARY: Design, develop, and maintain firmware for LoRaWAN module product lines (including xDot) and custom sensor applications. Work across Arm Mbed OS and Zephyr RTOS targeting STM32 and low-power Arm Cortex-M microcontrollers, delivering production AT command firmware, LoRaWAN Class A/B/C protocol compliance, and customer sensor solutions. This is the RTOS/RF-focused role required to continue LoRaWAN xDot development.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
Develop and maintain LoRaWAN module AT command firmware across multiple hardware variantsOwn the LoRaWAN MAC layer library - Class A/B/C operation, multicast, FOTA, ADR, regional parameter complianceImplement and validate LoRaWAN specification compliance including Class B beacon timing, ping-slot scheduling, and multicastPort and maintain Zephyr RTOS board support packages including board definitions, device drivers, and subsystem integrationDevelop custom LoRaWAN sensor applications using Mbed OS and Zephyr RTOS for customer-specific deploymentsBring up and validate new hardware variants and component changes across the product lineDesign and execute comprehensive host-based test suites using CppUTest and Zephyr TwisterMaintain bootloaders and FOTA update infrastructure for secure field updatesOptimize power consumption for battery-operated devices targeting ultra-low-power sleep modesSupport LoRa Alliance technical working group contributions (L2 protocol, payload schema)
QUALIFICATION REQUIREMENTS:
5+ years bare-metal and RTOS firmware development on Arm Cortex-M (M0+, M3, M4)Strong C/C++ for resource-constrained MCUs (32KB RAM / 256KB Flash targets)LoRaWAN protocol stack implementation experience (MAC layer, Class A/B/C, regional parameters)STM32 family (STM32L151, STM32L4, STM32U3) - peripherals, low-power modes, HAL/LL driversMbed OS 6.x application development and build systemZephyr RTOS - device tree, Kconfig, west build system, subsystem developmentSPI/I2C peripheral drivers (SX1272/SX1276/SX1262 radio, external flash, EEPROM)JTAG/SWD debugging, logic analyzer, RF test equipmentGit, CI/CD (Jenkins), automated firmware testingAT command interface design and implementation
PHYSICAL DEMANDS:
Lifting requirements up to 25 pounds.Requires sitting for periods of time and occasional standing.Use hands to finger, handle or feel.
WORK ENVIRONMENT:
Working conditions are normal for an office environment. Minimal noise.Our Minnesota facility includes a manufacturing environment. Moderate noise level. Machinery operation requires the use of safety equipment to include but not limited to; safety glasses, hearing protection, wrist and shoe straps, and ESD smock. Loose fitting clothing and jewelry are not permitted. No food allowed in the manufacturing area. No cell phone use allowed in manufacturing area unless approved by management.
EQUIPMENT AND TOOLS USED:
Laptop computerStandard office equipment