Saw Operator – Pipe Fabrication | 1st Shift

Candidates must have previous hands-on experience operating band saws and fabrication shop equipment , along with a strong understanding of pipe diameters, wall thicknesses, and material grades. The ideal candidate has excellent tape-measure skills, experience with pipe preparation and beveling, and the ability to safely operate various cutting, grinding, and fabrication tools.

Saw Operator – Pipe Fabrication | 1st Shift

Pay: Starting at $20.00+ per hour (Based on Experience)
Location: Tulsa, OK
Shift: 5:00 AM – 1:30 PM
Experience: Previous Saw Operation & Fabrication Experience Required
Job Order #: 155109

Position Overview

Stand-By Personnel is seeking an experienced Saw Operator for an industrial pipe fabrication opportunity in Tulsa, Oklahoma. This position is responsible for cutting, measuring, beveling, and preparing pipe materials according to blueprints and fabrication specifications.

Candidates must have previous hands-on experience operating band saws and fabrication shop equipment, along with a strong understanding of pipe diameters, wall thicknesses, and material grades.

The ideal candidate has excellent tape-measure skills, experience with pipe preparation and beveling, and the ability to safely operate various cutting, grinding, and fabrication tools.

This is not an entry-level position. Previous saw operation and fabrication shop experience are required.

This opportunity offers starting pay of $20.00 per hour or higher, depending on experience and qualifications.

Required Experience & Qualifications

Previous experience operating band saws and industrial fabrication equipment is required.

Candidates must be able to accurately read a tape measure and interpret blueprints, technical drawings, and fabrication specifications.

Strong knowledge of pipe diameters, wall thicknesses, and material grades is essential for selecting, measuring, and preparing the correct materials.

Experience with pipe cutting, beveling, grinding, and material preparation is required.

Candidates should have hands-on experience with the following equipment:

• 
  Small shop band saws
  
• 
  Pneumatic pipe bevelers
  
• 
  Oxy-acetylene pipe bevelers
  
• 
  Oxy-acetylene torches
  
• 
  Plasma torches
  
• 
  Die grinders
  
• 
  4.5-inch angle grinders
  
• 
  Drill presses
  

Strong mechanical aptitude, attention to detail, and the ability to maintain accurate measurements are essential.

Candidates must be comfortable working independently or as part of a fabrication team while maintaining production efficiency and quality.

Dependable attendance, strong communication skills, and a commitment to workplace safety are important.

Essential Duties & Responsibilities

Operate small shop band saws to accurately cut pipe and other fabrication materials according to work orders and production specifications.

Read and interpret blueprints, fabrication drawings, and technical instructions to determine cutting dimensions and material requirements.

Measure and mark pipe materials using tape measures and other applicable measuring tools.

Identify and verify pipe diameters, wall thicknesses, and material grades before cutting or preparing materials.

Perform pipe preparation and beveling operations using appropriate fabrication equipment.

Operate pneumatic and oxy-acetylene pipe bevelers to prepare pipe ends according to applicable specifications.

Use oxy-acetylene torches, plasma torches, die grinders, angle grinders, and drill presses as required for material preparation.

Inspect completed cuts and prepared pipe components for dimensional accuracy, proper bevels, and overall quality.

Identify material discrepancies, equipment concerns, or cutting errors and communicate issues to supervisors.

Maintain clean and organized work areas while following all company safety procedures and equipment operating requirements.

Assist with additional pipe preparation and fabrication responsibilities as assigned.

Band Saw Operation & Material Cutting

Candidates must have practical experience operating industrial band saws in a fabrication or manufacturing environment.

Responsibilities include measuring materials, preparing equipment, positioning pipe, and completing accurate cuts according to production requirements.

Strong attention to measurement accuracy and safe equipment operation is essential.

Candidates should be comfortable maintaining consistent cutting quality while working in a fast-paced fabrication shop.

Pipe Identification & Material Preparation

This position requires a strong understanding of pipe materials and specifications.

Candidates must be able to identify different pipe diameters, wall thicknesses, and material grades.

Responsibilities include verifying materials against fabrication drawings, measuring pipe accurately, and preparing components for additional fabrication or welding operations.

The ability to recognize incorrect materials or dimensional discrepancies is important for maintaining production quality.

Pipe Beveling & Fabrication Equipment

Candidates will perform pipe preparation and beveling using specialized fabrication equipment.

Experience with pneumatic pipe bevelers and oxy-acetylene pipe bevelers is especially valuable.

Additional responsibilities may involve operating cutting torches, plasma torches, grinders, and drill presses to prepare materials according to specifications.

Candidates must understand proper tool selection, safe equipment operation, and the importance of accurate pipe preparation.

Blueprint Reading & Precision Measurement

Candidates must be able to read and interpret fabrication blueprints, technical drawings, and applicable specifications.

Responsibilities include identifying required dimensions, verifying pipe sizes, following cutting instructions, and ensuring completed components meet production requirements.

Accurate tape-measure skills are required.

Strong attention to detail is essential for maintaining dimensional accuracy and reducing material waste.

Quality Inspection & Workmanship

Inspect completed pipe cuts, bevels, and prepared components to ensure they meet applicable fabrication specifications.

Verify measurements, material identification, and overall preparation quality before components advance to additional production stages.

Identify cutting or preparation concerns and make applicable corrections while maintaining consistent workmanship.

Preferred Qualifications

Previous experience as a Saw Operator, Pipe Saw Operator, Fabrication Saw Operator, Pipe Preparation Technician, or Industrial Fabrication Worker is highly valuable.

Experience with pipe fabrication, band saw operation, material identification, pipe beveling, blueprint interpretation, and industrial cutting equipment is preferred.

Candidates with a proven ability to independently measure, cut, and prepare pipe materials according to fabrication drawings are strongly encouraged to apply.

Physical Requirements & Work Environment

This is a physically active position in an industrial pipe fabrication shop.

Candidates must be comfortable standing and walking for extended periods, bending, reaching, lifting, carrying, and positioning pipe materials throughout the shift.

Work involves regular exposure to band saws, cutting torches, grinders, metal materials, and other fabrication equipment.

Candidates must maintain awareness of equipment hazards, sharp materials, sparks, and active production operations.

All required personal protective equipment and company safety procedures must be followed.

Schedule Requirements

1st Shift | 5:00 AM – 1:30 PM

Candidates must be comfortable with early-morning start times and maintain dependable attendance.

Specific workdays will be confirmed during the hiring process.

Why You'll Want This Opportunity

This position offers starting pay of $20.00+ per hour, based on experience, with an early first-shift schedule.

Experienced Saw Operators will have the opportunity to utilize their pipe fabrication, material preparation, beveling, and cutting skills in an industrial manufacturing environment.

An excellent opportunity for skilled fabrication professionals who take pride in accurate measurements, quality workmanship, and efficient production.

Ready to Apply?

Apply today for consideration and reference Job Order #155109.

Previous band saw operation and fabrication shop experience are required.

Candidates should highlight experience with pipe cutting, beveling, material identification, blueprints, and industrial fabrication equipment on their resumes.

Apply online or call/text 918-582-0522 for more information.

You can also walk in and apply at:

Stand-By Personnel – Tulsa Skilled Division
1531 E. 2nd St.
Tulsa, OK 74120
Monday–Friday | 8 AM – 4 PM

Stand-By Personnel — Helping People, Changing Lives.