| Location | Phoenix, Arizona |
KEY RESPONSIBILITIES
Weld Inspection & Quality Verification
• Perform in-process and final visual weld inspections on fabricated assemblies in accordance with applicable welding
codes (primarily AWS D1.1) and Capitol's quality standards.
• Evaluate welds against code and drawing acceptance criteria, identifying deficiencies such as undercut, porosity,
incomplete fusion, cracks, incorrect weld size, and dimensional non-conformances.
• Verify fitup and joint preparation prior to welding; confirm that joint geometry, root openings, and material preparation
meet the requirements of the applicable Welding Procedure Specification (WPS).
• Confirm that welders are working from and following the correct, current approved WPS for each weld they are
performing.
• Perform dimensional inspections of fabricated members and assemblies to verify conformance with shop drawings and
applicable tolerances.
• Inspect incoming materials with the Receiving/Inventory Coordinator to verify material identification labels, quantities,
and documentation match purchase orders and job requirements.
Communicating Deficiencies & Requirements
• Clearly and professionally communicate weld deficiencies and inspection findings directly to welders and fabrication
team members on the shop floor.
• Explain the specific nature of each deficiency — what the issue is, what the code or WPS requires, and what corrective
action is needed — in a manner that is constructive and easy to understand.
• Relay inspection hold points, witness points, and quality requirements to production personnel at the appropriate stage
of fabrication to prevent progression of non-conforming work.
• Communicate all significant findings, recurring deficiencies, and unresolved quality issues to the QC Supervisor
promptly and with sufficient detail to support disposition decisions.
• Support the QC Supervisor in delivering corrective guidance and coaching to welders when technique errors or WPS
deviations are identified.
Nonconformance Documentation
• Initiate and complete Nonconformance Reports (NCRs) for identified deficiencies, capturing accurate objective
evidence including weld location, deficiency type, applicable code reference, and photos as required.
• Ensure nonconforming material and welds are properly identified and marked to prevent inadvertent acceptance or
shipment pending disposition.
• Verify that corrective rework or repairs have been completed satisfactorily before re-releasing work for the next
operation or final inspection.
• Maintain accurate, complete inspection records for each job in accordance with Capitol's QMS documentation
requirements.
NDE Support & Coordination
• Assist the QC Supervisor with scheduling and coordinating nondestructive examination (NDE) activities including
magnetic particle testing (MT), liquid penetrant testing (PT), and ultrasonic testing (UT).
• Support NDE activities on the shop floor as directed by the QC Supervisor, including surface preparation, access
coordination, and follow-up documentation.
• Perform basic NDE methods as trained and authorized; all NDE work performed independently requires qualification
under Capitol's Written Practice per ASNT SNT-TC-1A.
Drawing & Document Review
• Review shop drawings and work orders prior to and during inspection to confirm that fabricated work matches
dimensional requirements, weld callouts, and applicable notes.
• Verify that production personnel are working from current, approved revisions of shop drawings; notify the QC
Supervisor immediately if superseded documents are identified in use.
• Reference applicable welding codes and WPSs during inspection activities to confirm acceptance criteria are correctly
applied.
QMS Support & Record Keeping
• Maintain thorough, legible, and organized inspection records for all assigned projects in accordance with Capitol's
quality management system requirements.
• Assist the QC Supervisor with maintaining welder qualification continuity logs, calibration records, and other QMS
documentation as directed.
• Support internal audit preparation and audit activities by ensuring records are complete and accessible when
requested.
• Follow all documented QMS procedures and work instructions applicable to the QC Assistant role.
Additional Duties
• Perform other related duties as assigned in support of quality control operations and Capitol's fabrication quality
objectives.
QUALIFICATIONS
Required
• High school diploma or equivalent required; associate degree or technical coursework in welding technology, quality, or
a related field preferred.
• Minimum 2 years of hands-on experience in a welding, fabrication, or quality inspection role within a manufacturing or
structural steel environment.
• Demonstrated ability to visually assess weld quality and identify common weld defects and discontinuities in a
production setting.
• Working knowledge of weld symbols, joint types, and basic fabrication drawing interpretation.
• Familiarity with Welding Procedure Specifications (WPS) and the ability to verify that weld parameters and techniques
conform to documented procedure requirements.
• Strong attention to detail with the ability to maintain accurate, organized inspection documentation.
• Clear and professional verbal communication skills; ability to deliver quality findings and corrective requirements to
welders and production personnel directly and constructively.
• Basic computer literacy sufficient to complete digital inspection forms, access job documentation, and communicate
via email.
Preferred
• Familiarity with AWS D1.1 (Structural Welding Code – Steel) visual inspection acceptance criteria.
• AWS Certified Welding Inspector (CWI) credential, or active progress toward CWI certification; support for obtaining
this credential may be available.
• Experience performing or assisting with nondestructive examination (MT, PT, UT) in a fabrication or industrial
environment.
• Familiarity with nonconformance reporting systems and quality management documentation practices.
• Prior experience working within an AISC-certified or similarly quality-audited fabrication environment.
• Experience using fillet weld gauges, calipers, and other basic inspection tools.
WORKING CONDITIONS
Physical Requirements
• Regularly required to stand, walk, and move throughout the fabrication shop floor for extended periods during
inspection activities.
• Occasional bending, kneeling, and reaching to access weld joints and assembly areas in various positions.
• Occasional lifting and carrying of documents, binders, and inspection equipment up to 25 lbs.
• Must be able to perform close visual inspection and use hand-held measurement and inspection tools in shop
conditions.
• Must be able to wear appropriate personal protective equipment (PPE) including safety glasses, hard hat, and steel-
toed footwear at all times on the shop floor.
Environmental Conditions
• Work is performed primarily in a fabrication shop environment subject to noise, heat, dust, welding fumes, and heavy
equipment operation.
• All applicable safety protocols and PPE requirements must be followed at all times when working in or near fabrication
and production areas.
Schedule & Environment
• Monday through Friday schedule. We have a day shift and a night shift. Flexibility may be required to support
inspection deadlines or production schedules.
• This is an on-site position. Remote work is not applicable to the essential functions of this role.