Pay rate range - $125/hr. to $130/hr.
Fully Onsite
Job Description:
- Focus:The act of assembling things — owns the process
- Determines root cause: process vs. equipment
- Troubleshoots using HMI fault logs
- Mechanical engineering background preferred
- Disciplines: Process, Manufacturing, Industrial, Quality, or Statistical/Manufacturing Engineering
- 8+ years experience required
- BS in Manufacturing, Mechanical, Industrial, Chemical, or related engineering (or equivalent hands-on experience)
- Must have process development experience on automated/semi-automated lines
- Strong command of DOE, SPC, MSA, PFMEA, and structured problem-solving (DMAIC, 5-Why, Fishbone, 8D
OVERVIEW
We are landing a set of automated and semi-automated production lines, built with automation integrators, into our facility. We are hiring a Process Engineer to take these lines from installed to dialed-in — running process development on the line, validating output against spec, and driving yield, quality, and throughput as they ramp. You own what the lines produce.
WHAT YOU'LL DO- Dial in the lines: Run process development on each line — tune parameters, run build trials, and bring output to spec.
- Validate & qualify: Build and run test/validation plans; establish process capability (Cpk) and close gaps against requirements.
- Hold the process: Stand up SPC and monitoring; keep each process in control and catch drift before it reaches the product.
- Own risk & control: Develop and maintain PFMEAs and control plans; prioritize improvements by risk.
- Make it better: Drive yield, quality, and cycle-time improvements using DOE, root-cause analysis, and Lean/Six Sigma.
- Document it: Own work instructions and process documentation so each line runs consistently.
REQUIRED- B.S. in Manufacturing, Mechanical, Industrial, Chemical, or related engineering, or equivalent hands-on experience.
- 8+ years in process or manufacturing engineering in a production environment.
- Proven process development and dial-in — taking a line from first builds to qualified, in-spec production.
- Process development experience on automated or semi-automated lines — comfortable developing a process around automated equipment, not just manual stations.
- Strong command of DOE, SPC, Measurement Systems Analysis (MSA), and process-capability analysis.
- Hands-on with PFMEA and control plans, and structured problem-solving (DMAIC, 5-Why, Fishbone, 8D).
- Proven yield, quality, and cycle-time improvement on live production.
- Able to operate independently on-site.
PREFERRED- Lean / Six Sigma Black Belt.
- Advanced DOE and statistical-analysis depth (JMP / Minitab) — able to design and interpret complex experiments, not just run standard tools.