Pipefitter 2

Zachry Holdings, Inc

  • Beaumont, TX
  • 2 days ago

    Highlights

    Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. Must be capable of working out side in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day.

    Numbers & Facts

    LocationBeaumont, TX

    Description

    An Industrial Pipe Fitter will assemble, layout, install and maintain pipe systems.

    Qualification Highlights:

    • Must have 4+ years working as an Industrial Pipe Fitter or Pipe Fitter Helper.
    • Must be able to read prints and illustrate thorough knowledge of pipe fitting procedures and skills.
    • Must have good leadership and communication skills.
    • Must have experience on an industrial construction project.

    Position Responsibilities:

    • Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required.
    • Identify all tools required for tasks.
    • Identify safety risks and the precautions required to eliminate those risks.
    • Prepare, fabricate, install, and fit pipe to specifications.
    • Install valves, hangars, supports, flanges inside piping system according to plans and applicable specifications.
    • Perform test to ensure the quality of the pipe and the piping systems.
    • Hoist loads using slings, chains, shackles, hooks, cables, and other rigging equipment.

    Required Qualifications:

    • Demonstrated industrial construction/maintenance history experience.
    • Ability to read prints and construction drawings.
    • Ability to read and interpret technical manuals and manufacturers manuals and instructions.
    • Demonstrate knowledge on the pipe fitting processes for industrial piping and boiler components for a combined-cycle power plant.
    • Must have 4+ years' experience with the pipe fitting processes.
    • Good problem-solving abilities.
    • Good aptitude and manual dexterity.
    • Good reading comprehension.
    • Ability to work with others - team player.
    • Ability to work independently - minimal supervision.
    • Good communication skills with co-workers and supervisors.
    • Commitment to Zachry values and safety rules and regulations.

    Preferred Qualifications:

    • Zachry ROF'ed employee.
    • Former Zachry Employee.
    • NCCER Certification as an Industrial Pipe Fitter
    • Formal/technical education.

    Reports to Position:

    • This position does not have any direct reports; however the position will work closely with and oversee on occasion of helper and labor positions. The position will hold a positional and expertise authority of the helper and laborer positions.

    Required Tools:

    • 1 - Metal Tool Box with Lock
    • 2 - Torpedo Magnetic Level
    • 1 - 25' Tape Measure
    • 1 - 5 Gallon Plastic Bucket
    • 2 - 12" x 24" Framing Square
    • 1 - String Level
    • 1 - 8" Crescent Wrench
    • 1 - 14" Pipe Wrench
    • 1 - 24" Pipe Wrench
    • 1 - Pipefitter's Blue Book
    • 1 - 420 Channel Locks
    • 1 - Torch Lighter (Striker)
    • 1 - Chalk Line
    • 1 - Set of Allen Wrenches
    • 1 - Line Up Bar
    • 2 - Combination Open/Box End Wrenches (7/8", 15/16", 1 1/16", 1 1/8", 1 1/4")
    • 1 - Screwdriver (Flat)
    • 1 - Set of Tip Cleaners
    • 1 - Pair of Leather Gloves
    • 1 - 24" Level
    • 1 - 16' Tape Measure
    • 1 - Pair of Cutting Goggles
    • 1 - Center Finder
    • 1 - 4" Wraparound
    • 1 - 12" Crescent Wrench
    • 1 - 18" Pipe Wrench
    • 1 - Center Punch
    • 1 - Wire Cutters
    • 1 - Plumb Bob
    • 1 - Set Blinding Wedges - Small
    • 1 - Hacksaw
    • 1 - 3lb to 4lb Ball Peen Hammer
    • 1 - Phillips Screwdriver
    • 1 - Combination Set - Tri- Square, Protractor, and Center Finder
    • 1 - 3/8 Ratchet Drive with 3/8" to 1" set
    • 1 - Construction Calculator
    • 1 - Rain Suit
    • 1 - Rubber boots

    Physical Requirements:

    • Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting.
    • Will talk and hear to communicate.
    • Must have good dexterity with hands and fingers to perform the precision adjustments of machinery parts and controls.
    • Will use arms and hands to signal, grab, hold, turn, push, pull: objects, materials, controls and tools.
    • May be required to lift, carry and move up to 50lbs.
    • Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will work at heights up to 300' utilizing proper fall protection.
    • Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision.
    • Must be capable of working out side in the elements including but not limited to the heat, cold, rain, snow and wind; and must be able to work for long period of times up to 12 hours a day.
    • Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

    ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.

    JOB REQUIREMENTS

    CERTIFICATIONS AND/OR LICENSES REQUIRED *

    • None

    OTHER POSITION OR SITE REQUIREMENTS

    Job Specific Requirements

    DOES THIS POSITION REQUIRE A COMPUTER? *

    No

    BACKGROUND CHECK *

    Yes

    REQUIREMENTS MEDICAL *

    • Drug Screen
    • Pre-Employment Physical

    SAFETY/ORIENTATION/TRAINING *

    • Audio
    • Safety Essentials
    • Pulmonary Function Test
    • Site Specific

    Similar Jobs