Maintenance Supervisor 1 - Plumbing (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position)

Maintenance Supervisor 1 - Plumbing (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position)

Apply now Search #: 499853

Work type: Full-time

Location: UConn Storrs

Categories: Maintenance and Trades

Maintenance Supervisor 1 - Plumbing

1st Shift; Monday - Friday, 7:00 a.m. - 3:00 p.m.

University of Connecticut, Facilities Operations, Storrs Campus

Salary Range: $74,028 to $96,813 Yearly. Individuals new to state service start at the minimum of the pay plan.

Link to Maintenance Supervisor 1 - Plumbing Job Specification

This position is categorized as "Open to Agency Only"

This position is open to current UConn NP-2 employees only

INTRODUCTION

UConn's Facilities Operations Department has a job opening for a Maintenance Supervisor 1 - Plumbing position within the Plumbing Shop. This is a permanent, full-time, 1st shift position, with a work schedule of Monday - Friday, 7:00 a.m. - 3:00 p.m., 37.50 hours per week with an unpaid half an hour for lunch. The hourly rate of pay for current NP-2 employees is calculated based on current salary/step.

This position is categorized as Emergency Support Services/Essential Staff. Must be willing to work during emergency closures/delayed openings due to inclement weather or for significant events that affect campus operations. Applicants must also be willing to respond to emergencies on overtime (nights, weekends, holidays and weather/storm related events).

Please note that Facilities Operations NP-2 employees may also be required to perform job duties as assigned at any of the Regional Campuses.

Additionally, this position may require participation in the Weekly On-Call Rotation Schedule; when assigned to the on-call rotation, the assigned cell phone must be carried, and calls must be responded to during the on-call assignment within 15 minutes.

SELECTION PLAN

This position is categorized as "Open to Agency Only". Current, qualified UConn NP-2 employees will be considered for this position. This position requires considerable knowledge of modern methods and equipment involved in the plumbing trade.

A current State of Connecticut P-1 or P-2 license is required and must be retained throughout employment with the University.

A current motor vehicle operator license is required and must be retained throughout employment with the University.

To Apply:

• In order to be considered for this position, you must meet the minimum qualifications as listed on the job posting and must specify your qualifications on your application. UConn Jobs applications will be evaluated to ensure that the Knowledge, Skill and Ability, Minimum Qualifications and Special Requirements sections of the position have been met. Please also be sure to demonstrate how you meet any of the Preferred Qualifications that you may have.
• Ensure that your UConn Jobs Application is complete and detailed before submitting it. You will not be able to make revisions once your application is submitted into the PageUp system.
• If applicable, applicants are strongly encouraged to indicate on their application (under the Job-Related Academic, Technical or Vocational Training section of the application) the name(s) of any Educational Institution(s) attended in trade related subjects, particularly in Plumbing and Heating, and to indicate the title(s) of the in person and/or online course(s) studied, Address, City, State where the Educational Institution(s) are located, the years attended and the number of Credits earned or Diploma Earned.
• If applicable, applicants are strongly encouraged to indicate on their application (under the Licenses and Professional Certification section of the application) any current trade license(s) held, along with the issuing agency, license number, date issued and expiration date.
• Applicants are required to indicate on their application (under the Licenses and Certification section of the application) their current driver's license number, date issued and expiration date.
• Although it is not required, applicants are strongly encouraged to submit a cover letter, resume and a list of three professional, work-related references along with their contact information.

Important Next Steps Information:

• At any point during the recruitment process, applicants may be contacted via email and provided with an opportunity to submit additional documentation which support their qualification(s) for this position. These documents may include: a cover letter, resume, performance reviews, attendance records, supervisory references, licensure, etc., at the discretion of the hiring department. Applicants must meet the minimum qualifications as indicated to apply for this position.
• If selected for an interview, you will be asked to supply the names, titles and phone numbers of three professional, work related references. In addition, current State of Connecticut employees at UConn or other State Agencies, may be asked to provide copies of their last two (2) performance appraisals and CORE attendance records.
• Please regularly check your email provided on your application for notifications. Please check your SPAM and/or Junk folders on a daily basis in the event an email provider places auto-notification emails in a users spam.

EXAMPLES OF DUTIES

At UConn the Maintenance Supervisor 1 (MS1) - Plumbing position for the Facilities Operations Plumbing Shop reports to the Maintenance Supervisor 2 (MS2) - Plumbing, assists the MS2 - Plumbing with the following job duties and performs these job duties independently in the MS2 - Plumbing's absence; this position also acts as a working supervisor and instructs staff as an "expert" in the Plumbing trade; the MS1 - Plumbing may also be required to perform the more technical tasks of the trade: responsible for leading and supervising highly skilled trades workers and apprentices in the repair and maintenance of plumbing systems; coordinating the daily work assignments of the Plumbing Shop; overseeing the purchase of tools and materials for all jobs and projects; working with the MS2 - Plumbing to maintain work schedules, job assignments and time records; maintaining employee records and handling disciplinary issues as required; completing service ratings, completing overtime equalization rosters, serving on hiring teams as a search committee member, overseeing areas of the high pressure hot water and steam systems on campus; working with the Utilities and HVACR Shops to ensure shared equipment is operating appropriately; reading and interpreting mechanical blueprints for building and utility systems; inspecting jobs for quality, as an "expert" in plumbing and steam fitting code requirements; bringing in and overseeing plumbing and steam fitting contractors when needed to upgrade and install new water and steam piping systems; working with engineering groups to plan upgrades and expansions of systems to accommodate growth of the campus; overseeing the estimating of projects and helping to set up assistance from other trade shops as needed; working with customers to determine work schedules, deciding when work can be done most efficiently, utilizing contractors when needed; assisting the management team in setting up budgets and long range goal planning; attending project meetings and making recommendations as to what standards for materials should be, along with determining the best method to carry out projects; monitoring cost tracking of projects to meet estimated cost; working with EHS to maintain safe and code compliant plumbing systems and work programs; working with the Business Service Center to schedule EHS and UConn training for the Plumbing Shop which includes but is not limited to: Continuing Education, Code, Asbestos Awareness, Confined Space, Lockout/Tag out, Mold Awareness, and Respiratory Protection & Fit Testing; responding to emergency plumbing failures outside of regular work hours as required.

• Schedules, assigns, oversees and reviews the work of staff;
• Provides staff training and assistance;
• Conducts performance evaluations;
• Determines priorities and plans crew work;
• Establishes and maintains crew procedures;
• Develops or makes recommendations on the development of policies and standards;
• Acts as liaison with other operating units, agencies and outside officials regarding unit policies and procedures;
• Prepares reports and correspondence;
• Performs some of the more skilled duties involved;
• May estimate time, skills and material needed for proposed repairs or improvements;
• Performs related duties as required.

KNOWLEDGE, SKILL AND ABILITY

• Considerable knowledge of
• relevant state and national codes and regulations;
• modern methods and equipment involved in the trade indicated by the parenthetical title of the class;
• Skills
• interpersonal skills;
• oral and written communications skills;
• in performing technical duties of the class;
• Ability to
• read and interpret specifications, blueprints, and sketches;
• utilize computer software;
• Supervisory ability.

MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE

• Five (5) years of experience in the trade area indicated by the parenthetical title.

MINIMUM QUALIFICATIONS - SPECIAL EXPERIENCE

• Two (2) years of the General Experience must have included performing highly skilled duties in the trade area indicated by the parenthetical title.
• NOTE: For state employees this experience is interpreted at the level of a Qualified Craft Worker.

SPECIAL REQUIREMENTS

• Incumbents in this class may be required by the appointing authority to possess and retain appropriate current licenses, permits and/or certifications including possession and retention of a license as an Unlimited Journeyperson in the trade area indicated by the parenthetical title.
• Incumbents in this class may be required to travel.
• Incumbents in this class must have a current State of Connecticut P-1 or P-2 License.
• Incumbents must possess and retain a current motor vehicle operator license throughout employment with the University.

PREFERRED QUALIFICATIONS

• Experience serving in a leadership capacity that includes demonstrated experience in the supervision of employees serving in a wide range of skilled job classifications such as Student Labor Apprentices, Skilled Trades Apprentices and Quality Craft Workers (QCW's).
• Eight years of plumbing trade experience.
• Experience working with HVACR and Utilities trade supervisors within the department to demonstrate knowledge, skill and ability in ensuring that shared equipment and systems are operating appropriately.
• Experience communicating effectively through both verbal and written methods.
• Experience using computer software such as AiM, HuskyBuy, Microsoft Excel, Word, Outlook, and/or Kuali Financial System (KFS).
• Demonstrated experience in the use of computerized maintenance management software (CMMS) including the use in the automation of such functions as service request/work order processing and work scheduling.
• Experience using an I-Pad or similar technology.
• Experience serving as a job search committee member to evaluate application materials and conduct interviews.
• Demonstrated experience in completing employee work performance evaluations.
• Experience completing purchasing related tasks such as obtaining price quotes, reviewing and approving invoices and/or participation in writing RFP's (Request for Proposal) in the Plumbing field of work.
• Knowledge of the management and removal of regulated materials as well as knowledge of applicable laws, regulations, nationally recognized standards and guidelines, as related to occupational safety and health.
• Familiarity with Connecticut Public Health Code Regulations and Connecticut DEEP Regulations.
• Knowledgeable of the NP-2 contract and University policies and procedures.
• Experience working with the university payroll system CORE-CT.
• Experience working extended hours for plumbing related emergencies.

PHYSICAL REQUIREMENTS

• Incumbents in this class must have adequate physical strength, stamina, physical agility and visual and auditory acuity, and must maintain such physical fitness as to be able to perform the duties of the class.
• A physical examination may be required.
• Incumbents in this class will be required to drive and operate motor vehicles, including, but not limited to vans, box trucks, and pick-up trucks ranging in size from compact, midsize, full-size, and heavy-duty, some of which are equipped with lift gates.
• Incumbents must have adequate physical strength and agility to walk up and down stairs frequently and climb ladders independently. Must be able to lift, carry and push material weighing up to 75 lbs. Must have the ability to utilize ladders, scaffolding, high-lifts and enter confined spaces. Must be able to inspect, troubleshoot and repair equipment that is part of a wide range of plumbing and mechanical systems. Incumbents must possess the ability to utilize tools, perform the required duties set forth above and will be required to wear personal protective equipment (PPE) when necessary.

WORKING CONDITIONS

• Incumbents in this class may be required to lift moderate to heavy weights; may be exposed to extreme weather conditions and to risk of injury from equipment.
• The appointing authority may require completion of an asbestos removal program consistent with EPA guidelines for operations and maintenance during employment in this class. Incumbents may be required to use protective equipment such as respirators and safety goggles.

TERMS AND CONDITIONS OF EMPLOYMENT

Employment of the successful candidate is contingent upon the successful completion of a pre-employment criminal background check and a pre-employment physical.

APPLICATION INSTRUCTIONS

Please apply online at Faculty and Staff Positions, Search #499853. Although it is not required, applicants are strongly encouraged to submit a resume, cover letter, and a list of three professional, work-related references along with their contact information. Applicants must clearly demonstrate how they meet the stated minimum qualifications, and any preferred qualifications they may possess, in their application materials.

This job posting is anticipated to be removed at 11:55 p.m. Eastern time on November 13, 2026.

CONCLUSION

All employees are subject to adherence to the State Code of Ethics.

Information concerning the University's policies regarding the Cleary Act Statement, Non-Discrimination Policy, Accommodations for Applicants with Disabilities, and Recruiting Veterans can be found on UConn's Job page. Please review the required notices and policy statements.

All members of the University of Connecticut are expected to exhibit appreciation of, and contribute to, an inclusive, respectful, and diverse environment for the University community.

The University of Connecticut aspires to create a community built on collaboration and belonging and has actively sought to create an inclusive culture within the workforce. The success of the University is dependent on the willingness of our diverse employee and student populations to share their rich perspectives and backgrounds in a respectful manner. This makes it essential for each member of our community to feel secure and welcomed and to thoroughly understand and believe that their ideas are respected by all. We strongly respect each individual employee's unique experiences and perspectives and encourage all members of the community to do the same. All applicants will receive consideration for employment without regard to race, color, ethnicity, religion, age, sex, marital status, national origin, ancestry, sexual orientation, genetic information, physical or mental disabilities, veteran's status, status as a victim of domestic violence and/or sexual assault and/or trafficking in persons as defined by Connecticut law, prior conviction of a crime, workplace hazards to the reproductive systems, or gender identity or expression.

The University of Connecticut is an AA/EEO employer including for Disability and Veteran status.

Advertised: Oct 28 2026 Eastern Daylight Time

Applications close: Nov 13 2026 Eastern Standard Time

Back to search results Apply now Refer a friend

Whatsapp Facebook LinkedIn Email App

Send me jobs like these

We will email you new jobs that match this search.

Ok, we will send you jobs like this.

The email address was invalid, please check for errors.

You must agree to the privacy statement

Subscribe

Current opportunities

Position Department Search # Location Closes Maintenance Supervisor 1 - Plumbing (1st Shift M-F) Limited to UConn NP-2 Employees Only (one position) FO Mechanical and Plumbng Svcs (FO Trade Services) (FO Energy and Trade Services) 499853 UConn Storrs Nov 13 2026 University of Connecticut's Facilities Operations Department, has one job opening for a Maintenance Supervisor 1 - Plumbing position at the Storrs Campus. This is a permanent, full-time, 37.50 hours/week position and has a work schedule of 1st Shift, Monday - Friday, 7:00 a.m. - 3:00 p.m. This position is limited to current UConn NP-2 employees only.

Powered by PageUp