Job Summary:
The purpose of the Heatset Winder Operator is to operate, thread & supply the Superba, Suessen, or Ornek Heat Setting Tunnel/ Winder & Accumulator.
Essential Duties & Responsibilities:
- Patrol and monitor the running of the machine.
- Inspect, Label, and Stack wound packages as instructed.
- Follow all Company, Safety & Quality Guidelines.
- Check the Specification sheet at the beginning of each shift and verify that all specs are being followed exactly as described on the spec sheet.
- Verify that each tube of yarn produced from the winder complies with the spec sheet.
- Load empty tubes into Winder magazine.
- Separate & Straighten the yarn bundle into the thread path from the Accumulator to the Winder.
- Use Air Splice to join any broken ends.
- If the Splicer doesn’t reach, tie a weaver knot with ¼ - ½” tail.
- Periodically check the thread path. If it is crossed, stop and correct the winder to ensure run-ability.
- Tunnel efficiency of 90 % or better is expected.
- Stack the finished packages as configured on the spec sheet.
- Keep the work area free of yarn waste at all times.
- Clean your assignment and work area each shift.
Performance Expectations (if applicable):
- Follow printed & spoken instructions & specifications effectively.
- Able to stand for long periods.
- Hand dexterity sufficient to handle packages, operate splicer, or tie weavers’ knots as specified.
- Able to lift & place numerous 12-20 lb. packages per shift.
Experience/Education Requirements:
- High school diploma or equivalent preferred.
- Basic math skills.
Other Requirements:
- Overtime is required on occasion.
- Perform any other duties as assigned.
- All accidents must be reported immediately.