Job Title: Clamp Truck Driver
Department: Corrugator
Reports to: Corrugator Superintendent/Shift Supervisor
Location: Receiving Dock, Paper Roll Storage, Corrugator Floor
Position Summary:
The Clamp Truck Driver is responsible for all paper roll receiving, inspection, storage, and corrugator-side placement operations at the box plant. This role is the critical link between inbound raw material and the corrugator production line: without accurate, timely roll placement, the corrugator cannot run. The Clamp Truck Driver operates a roll clamp attachment-equipped powered industrial truck to unload inbound paper deliveries, verify receipt against purchase orders, inspect rolls for damage, store rolls in designated locations, and stage and place rolls at the corrugator roll stands per the production schedule.
Paper rolls weigh between 1,500 and 5,000+ lbs and are handled exclusively by clamp truck. Precision clamping, controlled placement, and roll-stand loading require a high level of operator skill and spatial judgment. Mishandling at any stage - during unloading, storage, or placement - can damage rolls, create safety hazards, or cause corrugator downtime. This position demands full clamp truck proficiency, strong attention to detail, and reliable coordination with the corrugator crew at the wet end - making accurate, timely communication a core competency of this position.
About Us
ND Paper is a leading manufacturer of high-quality pulp, paper, and packaging products in the United States, generating over half a billion dollars in annual sales. As a wholly owned subsidiary of Nine Dragons Paper (Holdings) Limited - the largest containerboard producer in the world - ND Paper is part of a global network committed to excellence and innovation. With two integrated pulp and paper mills in Rumford, Maine and Biron, Wisconsin, a packaging plant in Sturtevant, Wisconsin, and two sheeting facilities in Langhorne, Pennsylvania and Fairmont, West Virginia, the ND Paper family produces nearly one million tons of products annually. Our 1,100 dedicated employees are the heart of our operations, and we are committed to fostering positive work environments where individuals can advance and thrive. At ND Paper, we are investing in our future, and that starts with our staff.
Key Responsibilities & Expected Results:
- Demonstrate safety as a core value and establish a safe work environment by actively leading the safe execution of work.
Inbound Receiving - Unloading & Verification
- Unload inbound paper rolls from flatbed, step-deck, or van trailers using the roll clamp truck
- Verify inbound roll count, species, grade, basis weight, width, and flute designation against the purchase order and bill of lading
- Inspect each roll for visible damage: crushed cores, wet damage, out-of-round, telescoping, torn wrappers, or contamination
- Segregate and tag damaged or non-conforming rolls; notify the Corrugator Superintendent or purchasing contact and do not place damaged rolls into inventory without authorization
- Sign and date the bill of lading accurately; note any shortages, overages, or damaged rolls on the delivery receipt before the driver departs
- Complete the inbound receiving log for every delivery: carrier, PO number, roll count, grades received, and any discrepancies
Roll Storage & Inventory Placement
- Transport received rolls from the receiving dock to designated storage locations in the paper roll warehouse or floor storage area
- Place rolls in assigned rack positions or floor storage rows per the storage layout - correct grade and width in correct location, every time
- Store rolls core-up in a stable, plumb position; never lean rolls against walls, equipment, or other rolls without designated lean storage
- Maintain FIFO (first in, first out) rotation within each grade and width - oldest rolls must be staged for production use first
- Keep storage aisles clear and marked storage positions organized; do not block sprinkler heads, fire exits, or electrical panels
- Conduct periodic inventory counts of roll storage as directed; report discrepancies between physical inventory and system records to the superintendent
Production Staging & Roll Stand Placement
- Review the corrugator production schedule at the start of each shift to understand upcoming paper requirements by grade, width, and flute position (liner vs. medium)
- Stage the correct rolls - in sequence - adjacent to the corrugator roll stands in advance of production need; never allow the corrugator to wait on paper
- Load rolls onto corrugator roll stands (splicer stands, single facer medium stand, liner stands) with precision: centered on the mandrel, core engaged, roll plumb and secure
- Confirm roll identity (grade, width, basis weight) against the run card before placing on the stand - wrong roll on the stand causes waste and potential quality failures
- Coordinate splice staging with the CR Operator and Single Facer Operator: have the next roll in position and ready before the running roll reaches its splice point
- Remove empty cores and spent roll remnants from the roll stands promptly; return cores to the designated core storage or disposal area
Roll Condition Assessment
- Inspect every roll before placing it on the corrugator stand: check core integrity, roll roundness, wrapper condition, and any signs of moisture or damage sustained in storage
- Flag and pull any roll that shows core crush, out-of-round greater than acceptable tolerance, wet or soft spots, or wrapper damage exposing the sheet - do not place compromised rolls on the stand
- Communicate roll condition concerns to the CR Operator or Corrugator Superintendent before they affect the run
- Track and report recurring paper quality issues (consistent moisture, edge damage, telescoping from a specific supplier or shipment) to support purchasing follow-up
Equipment Operation & Care
- Operate the roll clamp truck safely at all times: travel at safe speeds, observe pedestrian right-of-way, sound horn at intersections and blind corners
- Perform pre-shift equipment inspection (OSHA-required): brakes, horn, lights, forks/clamp attachment, hydraulics, tires, and fluid levels - complete and sign the inspection checklist
- Report any equipment defects discovered during pre-shift inspection or operation immediately; do not operate a defective truck
- Handle the clamp attachment with care: proper clamp pressure for roll diameter and weight - never over-clamp (crushes core) or under-clamp (drops roll)
- Keep the clamp truck fueled or charged per plant procedure; report battery or propane levels at end of shift
- Report all near-misses, equipment damage, or property contact incidents immediately - no exceptions
Housekeeping & Dock Management
- Keep the receiving dock clear: remove packing materials, stretch wrap, damaged roll wrappers, and core debris promptly after each delivery
- Maintain roll storage aisles clean and free of trip hazards, spilled roll wrap, or loose materials
- Sweep or blow down the dock area and paper roll storage zone as part of shift housekeeping duties
- Ensure dock plates, dock levelers, and trailer chocks are used correctly for every inbound unloading operation
- Secure trailer wheels with wheel chocks and confirm trailer is chocked and glad-hand locked before beginning unloading
Safety
- Maintain valid plant clamp truck certification at all times - operating without a valid certification is grounds for immediate removal from the role
- Never carry passengers on the clamp truck or allow personnel to stand beneath a raised load
- Maintain safe travel speed with loads; lower forks/clamp to travel height before moving
- Observe all pedestrian zones, designated traffic lanes, and posted speed limits within the plant
- Never place or lean paper rolls in a position that could tip, roll, or fall onto personnel or equipment
- Wear required PPE at all times: safety glasses, steel-toed footwear, high-visibility vest in dock and traffic areas
- Report all safety hazards, near-misses, and incidents to the Shift Supervisor immediately
Reporting & Communication
- Maintain the receiving log and roll placement log accurately for every shift
- Communicate paper inventory levels to the Corrugator Superintendent when any grade or width falls below a defined reorder threshold
- Notify the CR Operator immediately if a required roll for the production schedule is unavailable, damaged, or incorrect
- Brief the incoming driver at shift change: rolls staged at the corrugator, delivery status, any damaged or hold-tagged inventory, and open issues
Key Working Relationships
Role
Interface
Corrugator Superintendent
Primary supervisor; receives production schedule, paper requirements, and direction on inventory and receiving priorities
CR Operator
Coordinates roll staging sequence and placement timing to match production schedule; receives advance notice of upcoming paper needs
Single Facer Operator
Coordinates splice staging; provides advance request for next roll before running roll reaches splice point
Double Backer Operator
Coordinates liner roll placement at double backer stands; flags liner roll condition issues
Shift Supervisor
Reports safety incidents, equipment faults, inbound receiving discrepancies, and shift-level issues
Purchasing / Procurement
Reports inbound discrepancies, damaged rolls, and supplier quality concerns for PO resolution and supplier follow-up
Inbound Carriers / Drivers
Manages unloading process; completes and signs BOL; documents any delivery discrepancies before driver departs
Key Performance Indicators (KPI's)
- Roll staging timeliness - corrugator downtime events attributable to late or missing roll placement (target: zero)
- Receiving accuracy - inbound discrepancies caught and documented at point of receipt; no uninspected rolls entering inventory
- Roll placement accuracy - wrong-roll-on-stand incidents causing waste or quality failures (target: zero)
- Damaged roll identification - damaged rolls caught before placement; none discovered after the fact on the corrugator stand
- Inventory accuracy - roll storage locations maintained per layout; FIFO compliance
- Equipment inspection compliance - pre-shift checklist completed and signed every shift
- Safety - zero recordable incidents; no unreported near-misses or equipment contact events
- Dock housekeeping - dock and storage area maintained to plant housekeeping standard each shift
Qualifications and Skills /Education and Experience
Required
- High school diploma or GED
- Valid powered industrial truck (clamp truck) certification, or ability to obtain certification within 30 days of hire
- Minimum 1 year of clamp truck or forklift operation experience in a manufacturing, paper, or distribution environment
- Ability to operate roll clamp attachment with precision; prior roll handling experience strongly preferred
- Ability to read purchase orders, bills of lading, run cards, and inventory documents accurately
- Physical ability to work in a fast-paced, hot, noisy industrial environment for a full shift
- Reliable and punctual - corrugator production depends directly on this role being staffed and active
Preferred
- Prior experience handling paper rolls in a corrugated, tissue, or printing/converting facility
- Familiarity with corrugated paper grades: liner (kraftliner, testliner, mottled white) and medium (semi-chemical, recycled)
- Experience using WMS (Warehouse Management System) or ERP inventory systems for receiving and inventory tracking
- Familiarity with FIFO inventory management in a paper roll environment
- Experience operating reach trucks, order pickers, or other powered industrial equipment in addition to clamp trucks
- Bilingual in Mandarin/English a plus
Physical Requirements
Requirement
Frequency
Operating clamp truck for extended periods
Continuously
Standing and walking on concrete dock and plant floor
Frequently
Climbing in/out of clamp truck cab repeatedly
Frequently
Lifting up to 50 lbs (paperwork, core handling, supplies)
Occasionally
Working outdoors at receiving dock in variable weather
Frequently
Working in high-noise corrugator environment near roll stands
Frequently
Visual inspection of rolls at close and medium range
Continuously
Operating in areas with moving equipment and pedestrian traffic
Continuously
Career Development
The Clamp Truck Driver role builds foundational knowledge of corrugated paper grades, corrugator paper consumption, and plant material flow - knowledge that supports advancement into corrugator operations or warehouse leadership. Development paths include:
- Stacker / Dry End Operator - entry into the corrugator crew; first step toward full corrugator qualification
- Double Backer Operator - advancement into wet end operation for drivers who cross-train on the corrugator crew
- Warehouse Lead / Material Handler Lead - supervision of dock, storage, and internal logistics functions
- Receiving / Inventory Coordinator - administrative and systems-oriented growth path within supply chain
Working Conditions
Onsite at manufacturing facility
Attributes for Success
- Hard work - tackle each task with determination, passion and creativity; the willingness to put in whatever effort is required to successfully complete the job at hand.
- Pursuit of Excellence - strive to consistently exceed expectations in our day-to-day work and outperform our competitors in the marketplace, regarding work and company achievements as a collaborative goal with the desire to go above and beyond.
- Integrity - treat the company and teammates with upmost respect, operating on strong moral codes to drive company values and culture.
- Sense of Urgency - drive forward each day with speed, agility, and flexibility to capture unrealized opportunities and avoid potential risks for the business.
- Entrepreneurial Spirit - act like an owner, challenging the status quo, asking the right questions, and actively seeking ways to innovate and improve.
- Adaptability - be fluid with ND Paper's continuous evolution while driving change in a fast-paced environment, equipped with the ability to acclimate quickly.
- Servant Leadership - set an example by implementing meaningful leadership with heart, empathy, foresight and stewardship.
ND Paper Benefits
We offer a comprehensive benefits package that includes:
- Medical, dental, and vision insurance as well as voluntary benefits such as accident insurance, hospital indemnity, and critical illness for you and your family.
- Financial protection benefits, including life insurance, disability insurance, and business travel accident insurance.
- Tax advantaged accounts such as Healthcare and Dependent Care Flexible Spending Account (FSA).
- Paid holidays, personal days, and vacation days to support work-life balance.
- A 401K retirement plan with a company match and annual fixed contribution
- Wellness programs with incentives and an on-site clinic available at our Rumford and Biron location.
Enjoy competitive salaries, comprehensive health benefits, and paid time off. Discover more about our benefits and how we support our team by visiting 2026 Benefits. Come be a part of our team and grow with us!
Apply
Please submit your resume, and salary requirements to https://us.ndpaper.com/careers
No unsolicited resumes - ND Paper does not accept unsolicited resumes from search firms or employment agencies. Any unsolicited resume you submit to us will immediately become the property of ND Paper. If you would like to become a recruiter for ND Paper, please contact us and we will agree in writing to terms and the specific job roles for which you are authorized to recruit.