First Article Quality Inspector Scanner (Aerospace/Defense Exp.)

Job Title – Fist Article Quality Inspector/ Scanner)
MUST HAVE Aerospace/ Defense Manufacturing Exp.
Company Location –Fullerton, CA
On-site, Full Time
Contract-to-hire
Salary Range; $30-38/hr., DOE
First Shift

Job Summary of the Inspector Scanner position
Integr8staff seeks a proven Quality Inspector to lead inspection and origination of First Article Inspection reports in the manufacturing process and to ensure customer requirements are met. The candidate also identifies and reports any defects and ensures the defects are corrected before the finalization of the first article inspection. This is a critical role in the manufacturing process. Only experienced candidates are required to apply.

Responsibilities of the Inspector Scanner position
Carries out and coordinates all inspection and test requirements as outlined in the Quality Procedure Manual and contract requirements including compliance with the requirements of AS9100 and AS9102 standards.
Maintains relevant updated specification, standard and quality systems documents.
Inspects visually for defects.
Compares results with drawing and specification requirements.
Reports problems with inspection and test results to Quality Supervisor.
Identifies defective parts and segregates from acceptable product.
Notifies Quality Supervisor and Quality Engineer when inspection data exceeds acceptable limits or when major incidents of poor quality are noted.
Records results on inspection forms or charts and report number of defects found.
Supports the quality record retention requirements.
Experience with a 3D scanner or Faro Arm
Other duties as assigned.

Requirements of the Inspector Scanner position
High School Degree or equivalent strongly preferred.
Minimum of three years successful employment as an individual contributor with a preference for aerospace manufacturing experience.
Experience in Quality Assurance standards is preferred.
Proficiency in GD&T. Ability to read blueprints.
1st Article experience, preferably more than a year.
Experience with AS9100 and AS9102 quality systems
Proficiency with different gages (e.g. calipers, pin gages, radius gages, snap gages, etc.)
Experience with GE, Middle River, and/or Collins preferred.
Microsoft Excel a must.

Updated resume is required for consideration.  Only Local candidates will be considered - Position does not offer relocation or visa sponsorship.