Posting DeadlineThis position is posted until filled.DepartmentWNM EngineeringEngineer IIISalary: DOEPersonnel in this job title may be covered by NERC CIP cyber security standards. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a Personnel Risk Assessment, which includes identity verification and a criminal background check. Prior to being granted unescorted access to cyber secure areas, the candidate must attend cyber security training. Annual cyber security training is also required.Given the financial nature of this position, this position may be required to obtain a credit check depending on location. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a credit background check.SummaryUnder general supervision plans, schedules, conducts, and coordinates the engineering work for a total project of moderate scope or for detailed phases of part of a major project.Essential Duties And ResponsibilitiesManages all the engineering aspects of projects of moderate scope or detailed phases of major project effortsLeads or conducts performance, cost, and scheduling studies of varying size that are generally conventional in natureSupports operational areas through the application of standard and non-standard engineering techniques, practices, and proceduresCommunicates engineering ideas, recommendations, and evaluations to diverse internal groups in a working or conference type environmentRepresents the company's interests in engineering matters that may be varied and complex in natureInteracts with and provides broad knowledge technical support to other associatesApplies engineering expertise to improve or develop new standardsProvides technical direction and/or activity supervision to contractors and company personnel on a regular, on-going basisCompetenciesBroad knowledge and proven ability to apply engineering principles, practices and regulations to, and perform economic and decision analysis studies of issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulationsAbility to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, ASME, NACE, etc.)Ability to translate electrical theory and physics to utility application for improving system reliabilityAbility to make informed repair decisions following company protocolsComfortable working in and around high voltage (up to 345kV) electrical facilities and equipmentAbility to forecast budgetsDemonstrated leadership skills, self-motivation, and interpersonal skillsQualificationsMinimum Education and/or Experience: Bachelor's Degree in Engineering from a college/university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET), plus four or more years of engineering experience or three or more with a Fundamentals of Engineering certificate or three or more with a Master's Degree in Engineering.Certificates, Licenses, and Registrations: Fundamentals of Engineering certificate is preferred. Must possess current, legally valid driver's license and meet the Company's driving record requirements.Communication SkillsAbility to read and interpret documentsAbility to write routine reports and correspondence, write speeches, and presentationsAbility to speak effectively before groups of customers, employees, and managers of the organizationComputer SkillsIn-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programsIn-depth knowledge of word processing, database, and spreadsheet softwareAnalysis and Problem‑solving AbilityAbility to apply common sense understanding to carry out complex instructions furnished in written, oral, or diagram form. Ability to deal with complex problems involving several concrete variables in complicated situations.Physical DemandsThis position requires periods of frequent sitting, standing, walking, and exposure to outside elements, lifting (50 pounds or under), crouching, bending, climbing and working at various heights. Protective equipment required: hard-hat, safety glasses and hearing protection.Work EnvironmentTime will be divided between office and field, with a majority of time in the office. Work will be around high voltage electricity facilities, computers, office equipment, and construction equipment.Engineer ISalary: DOEPersonnel in this job title may be covered by NERC CIP cyber security standards. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a Personnel Risk Assessment, which includes identity verification and a criminal background check. Prior to being granted unescorted access to cyber secure areas, the candidate must attend cyber security training. Annual cyber security training is also required.Given the financial nature of this position, this position may be required to obtain a credit check depending on location. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a credit background check.SummaryUnder direct supervision, performs assignments designed to develop engineering work knowledge and abilities through the application of standard techniques, practices and procedures.Essential Duties And ResponsibilitiesProvides entry‑level engineering support for projects that are small and somewhat repetitive in natureConducts small or repetitive studies or participates in larger studies where project performance, cost, and scheduling are the key factors of evaluationProvides basic engineering support to operational areasCommunicates engineering ideas, recommendations and evaluationsRepresents the Company in technical matters that are fundamental in natureProvides entry‑level technical support to and interacts with other associatesUses the Company and industry standards to ensure safety and consistency of engineering resultsProvides occasional technical direction and/or activity supervision to contractors and lower-level Company personnelCompetenciesKnowledge and ability to apply the appropriate basic and well‑established principles, practices and regulations in the incumbents respective disciplineAbility to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, etc.)Demonstrated good leadership skills, self-motivation, and good interpersonal skillsAbility to translate electrical theory and physics to utility application for improving system reliabilityDemonstrated confidence working in and around high voltage (up to 345kV) electrical facilities and equipmentMinimum Education And/Or ExperienceBachelor's Degree in engineering from a college or university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET) and one to three years related experience.Certificates, Licenses, RegistrationsMust possess current, legally valid driver's license and meet the Company's driving record requirements.Communication SkillsAbility to read and interpret documentsAbility to write routine reports and correspondence, write speeches, and presentationsAbility to speak effectively before groups of customers, employees, and managers of the organizationComputer SkillsIn-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programs, such as AutocadWorking knowledge of operating systems, word processing, database, and spreadsheet softwarePhysical DemandsThis position requires periods of frequent sitting, standing, walking, and exposure to outside elements, lifting (50 pounds or under), crouching, bending, climbing and working at various heights. Protective equipment required: Hard‑hat, safety glasses and hearing protection.Work EnvironmentTime will be divided between office and field, with a majority of time in the office. Work will be around high voltage electricity, computers, office equipment, and construction equipment.Engineer IISalary: DOEPersonnel in this job title may be covered by NERC CIP cyber security standards. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a Personnel Risk Assessment, which includes identity verification and a criminal background check. Prior to being granted unescorted access to cyber secure areas, the candidate must attend cyber security training. Annual cyber security training is also required.Given the financial nature of this position, this position may be required to obtain a credit check depending on location. If the position is covered, prior to being hired, promoted, or transferred into the position, the candidate must successfully pass a credit background check.SummaryUnder general supervision, independently evaluates, selects, and applies standard engineering techniques, practices, and procedures commonly employed in a specific area of assignment.Essential Duties And ResponsibilitiesProvides the engineering expertise necessary to support intermediate projects that are generally conventional in natureConducts or participates in studies of intermediate size that evaluate performance, cost, and scheduling criteria of a limited number of alternativesApplies routine engineering techniques, practices, and procedures in support of operational areasCommunicates engineering ideas, recommendations, and evaluations effectively to engineering and non‑engineering individuals and groupsRepresents the Company in intermediate engineering mattersInteracts with and provides technical support consistent with the application of well‑established standards to other associatesParticipates in the formulation of Company and industry standardsProvides technical direction and/or activity supervision to contractors and Company personnel as required by specific assignments/projectsCompetenciesKnowledge of and ability to apply standard engineering principles, practices and regulations, and economic and decision analysis principles to area problems including, but not limited to, generation, transmission, distribution, fuels, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulationsAbility to read, interpret and apply national, state and local codes and standards (IEEE, ANSI, NEC, NESC, ACI, AISC, etc.)Demonstrated good leadership skills, self‑motivation, and good interpersonal skillsAbility to translate electrical theory and physics to utility application for improving system reliabilityComfortable working in and around high voltage (up to 345kV) electrical facilities and equipmentMinimum Education And/Or ExperienceBachelor's Degree in Engineering from a college/university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET), plus 2 or more years of engineering experience or 1 or more with a Fundamentals of Engineering certificate or 1 or more years plus a Master's Degree in Engineering.Certificates, Licenses, And RegistrationsFundamentals of Engineering certificate preferred. Must possess current, legally valid driver's license and meet the Company's driving record requirements.Communication SkillsAbility to read and interpret documentsAbility to write routine reports and correspondence, write speeches, and presentationsAbility to speak effectively before groups of customers, employees, and managers of the organizationComputer SkillsIn-depth knowledge of personal computers including demonstrated proficiency with electrical engineering design programs, Autocad, Word, Access, Excel, Windows, etc.Physical DemandsThis position requires periods of frequent sitting, standing, walking, and exposure to outside elements, lifting (50 pounds or under), crouching, bending, climbing and working at various heights. Protective Equipment Required: Hard‑hat, safety glasses and hearing protection.Work EnvironmentTime will be divided between office and field, with a majority of time in the office. Work will be around high voltage electricity, computers, office equipment, and construction equipment.Safety and ADA StatementSafety is a core value at (TXNM Energy/PNM/TNMP) and our vision, "everyone goes home safe", reflects our commitment to promoting an environment conducive to learning, improving and building safety practices. Our safety value is built upon the belief that every employee deserves to work in an environment free from harm.Americans With Disabilities Act (ADA) Statement: If you require assistance with the job application process due to a disability, please contact HR ADA Analyst, at 505‑241‑4627.#J-18808-Ljbffr