SUMMARY
Maintain and repair mobile equipment including diesel-powered gasoline-powered and electric vehicles, generators, and auto shop equipment.
ESSENTIAL DUTIES
Correct vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling, disassembling, and replacing major assemblies, sub-assemblies, components, parts, or systems such as power and drive trains, electrical, fuel, emission, brake, steering, and hydraulics.
Perform adjustments and alignments including bearing loads, gear tooth contact, valve mechanisms, governors, oil systems, control linkages, clutches, and traction units.
Conduct regular vehicle inspections and diagnostic tests to identify worn and damaged parts.
Diagnose, maintain, and repair vehicle automotive systems including but not limited to diesel and gasoline engines, transmission, mechanical and electrical steering, suspension, and air brakes.
Maintain scissor lifts, boom lifts, and ancillary equipment.
Communicate directly with the Maintenance Manager on the status of repairs, parts required, and estimated time needed for repairs.
Complete all tasks assigned in a timely manner, maintain accurate records of all maintenance and repair work, and submit receipts of purchases and services provided by third parties.
Maintain the work area in a clean and orderly condition and follow prescribed safety regulations.
Train and educate maintenance department to assist with maintenance of mobile and ancillary equipment.
Perform other related duties as assigned for the purpose of ensuring an efficient and effective work environment.
Ensure activities are conducted in accordance with Vital Link International Standards Organization ISO9000, OSHA, EPA, ASME, ANSI, state regulations, policies, and industry best practices. Correct and report any deviations to appropriate area managers/supervisors.
ISO9000 SPECIFIC DUTIES
Be familiar with and understand Vital Link Quality Policy and company objectives.
Understand required ISO9000 specific Procedures and Work Instructions.
Complete all records required by Procedures and Work Instructions.
Participate in Vital Link Continuous Improvement activities as appropriate.
Participate in ISO9000 training as required.
Cooperate with Auditors.
Report any deviations to appropriate area managers/supervisor.
EDUCATION AND/or EXPERIENCE
High school diploma or General Education Degree GED required.
Minimum five years of diesel mechanic service experience, preferably forklifts, manlifts, skid steers, frontend loaders, tractors, diesel trucks, generators, and/or similar heavy equipment or ASE diesel mechanic certification or equivalent, and minimum of three years of diesel mechanic work experience.
12 VDC 24 VDC automotive electrical experience required.
Up to 48 VDC experience is preferred.
Single-phase and three-phase electrical experience from 110VAC up to 480VAC is preferred.
CERTIFICATES LICENSES REGISTRATIONS
ASE diesel mechanic certification preferred.
PHYSICAL DEMANDS
Employee is frequently required to stand, walk, sit, and occasionally lift and/or move up to 50.
Full color vision to differentiate colors of wires and other components.
WORK ENVIRONMENT
Work is primarily outdoors and in an open shop environment exposed to varied weather conditions.
The role involves exposure to potentially hazardous dust and fumes necessitating the use of personal protective equipment.
The work environment can be noisy, often requiring hearing protections.
Noise level in the work environment is usually moderate.
Typically requires eight to ten-hour workdays, four or five days per week, with occasional work on Saturdays and Sundays, as well as early and/or late hours to meet business needs.
Extended work hours and/or travel may occasionally be required.
www.Atec.com
Equal Opportunity Employer.
All qualified applicants will receive consideration for employment without regard to disability or protected veteran status.
If you need a reasonable accommodation, please contact Andrea Lopez at 281-276-2643.