PROCESSING APPLICATION
Hold tight! We’re comparing your resume to the job requirements…
ARE YOU SURE YOU WANT TO APPLY TO THIS JOB?
Based on your Resume, it doesn't look like you meet the requirements from the employer. You can still apply if you think you’re a fit.
Job Requirements of Machinist:
At Volt, our greatest strength is our peopleVolt is immediately hiring a Machinist for Vista, Ca.
Machinist
1st 4:00 a.m. to 12:30 p.m
$30.00-33.00/hr
As a Machinist you will:
• Read blueprints - joints, material size and type, finishes, symbols, weld call outs, significance, tolerances, and special call outs.
• Set up chuck, vise(s) and/or fixture for holding work on machine.
• Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data.
• Accurately document program, set-up, run time, and total time to Travelers.
• Utilize specific, backed-up folders for storing program data.
• Successfully and appropriately use pneumatic tools - 90-degree mini grinder, straight mini grinder.
• Use a micrometer when measuring.
• Set up and operate lathes or mills, keep machines/work areas clean and clutter-free.
• Stay aware of square, perpendicularity, parallelism, flatness, and tolerances when setting up parts or weldments.
• Use Dial Calipers, Machinist's Square, Combination Square, 1-2-3 and/or 2-4-6 blocks, Tape Measure
• Monitor and review information from materials, events, or the environment to detect or assess problems.
• Responsible for demonstrating concern for the safety of self and others.
• Carefully stay within Blueprint tolerances (Typically .010" to .030")
• Deburr all parts coming off the machine and before handing it off to another department.
• Safely Use electric tools - 4" grinder, 8" grinder, drill press, hand drill, sanders, pedestal grinders, and hone tools.
• Use CNC codes to operate machines.
This is afull time opportunity
The ideal candidate will have:
• High School Diploma/GED required for the position.
• Safety protocol experience.
• 5+ years of experience running CNC mills / lathes.
• Experience and use of Zimmermann FZ-35 5-axis CNC bridge mill with Heidenhain control interface.
• Experience and use of DMG Mori NLX 2500/1250 with live tooling and secondary spindle.
Preferred experience:
• 10+ years of machining in a manufacturing environment.
• Experience working on a variety of projects while being adaptive.
• Able to read, write, and count accurately to complete all documentation.
• Proficiency in various machining materials, including but not limited to carbon steel, alloy steel, and stainless steel.
• Demonstrated ability to learn new skills and follow written procedures.
• Competence in operating CNC machines, bench sanders and grinders, lathes, mill machines, band saw, and cold saw.
• Experience working with 1/16" - 4" thickness plate, up to 12" Diameter or 12" Square Bar or tubing.
• Able to mount cutting tools per CNC programs/instructions.
• Strong capability of using practical judgment.
• Demonstrates initiative, high motivation to excel, self-starter, and adaptability.
• Experience using pneumatic, electrical, and hand tools.
• Be courteous of others, including input on machining subject matter.
• Ability to meet deadlines.
• Familiar with CNC Mastercam or other manufacturing and design software.
• Precision and ability to pay attention to detail.
• Familiarity with industry codes and regulations.
• Able to lift up to 49 lbs.
• Familiar with lifting equipment for lifting over 49 lbs.
Pay rate $30.00-33.00/hr
•Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc.
Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible.
Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP).
Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please email or call
Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.
Do you meet the requirements for this job?
Machinist
At Volt, our greatest strength is our people
Volt is immediately hiring a Machinist for Vista, Ca.
Machinist
1st 4:00 a.m. to 12:30 p.m
$30.00-33.00/hr
As a Machinist you will:
* Read blueprints - joints, material size and type, finishes, symbols, weld call outs, significance, tolerances, and special call outs.
* Set up chuck, vise(s) and/or fixture for holding work on machine.
* Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data.
* Accurately document program, set-up, run time, and total time to Travelers.
* Utilize specific, backed-up folders for storing program data.
* Successfully and appropriately use pneumatic tools - 90-degree mini grinder, straight mini grinder.
* Use a micrometer when measuring.
* Set up and operate lathes or mills, keep machines/work areas clean and clutter-free.
* Stay aware of square, perpendicularity, parallelism, flatness, and tolerances when setting up parts or weldments.
* Use Dial Calipers, Machinist's Square, Combination Square, 1-2-3 and/or 2-4-6 blocks, Tape Measure
* Monitor and review information from materials, events, or the environment to detect or assess problems.
* Responsible for demonstrating concern for the safety of self and others.
* Carefully stay within Blueprint tolerances (Typically .010" to .030")
* Deburr all parts coming off the machine and before handing it off to another department.
* Safely Use electric tools - 4" grinder, 8" grinder, drill press, hand drill, sanders, pedestal grinders, and hone tools.
* Use CNC codes to operate machines.
This is afull time opportunity
The ideal candidate will have:
* High School Diploma/GED required for the position.
* Safety protocol experience.
* 5+ years of experience running CNC mills / lathes.
* Experience and use of Zimmermann FZ-35 5-axis CNC bridge mill with Heidenhain control interface.
* Experience and use of DMG Mori NLX 2500/1250 with live tooling and secondary spindle.
Preferred experience:
* 10+ years of machining in a manufacturing environment.
* Experience working on a variety of projects while being adaptive.
* Able to read, write, and count accurately to complete all documentation.
* Proficiency in various machining materials, including but not limited to carbon steel, alloy steel, and stainless steel.
* Demonstrated ability to learn new skills and follow written procedures.
* Competence in operating CNC machines, bench sanders and grinders, lathes, mill machines, band saw, and cold saw.
* Experience working with 1/16" - 4" thickness plate, up to 12" Diameter or 12" Square Bar or tubing.
* Able to mount cutting tools per CNC programs/instructions.
* Strong capability of using practical judgment.
* Demonstrates initiative, high motivation to excel, self-starter, and adaptability.
* Experience using pneumatic, electrical, and hand tools.
* Be courteous of others, including input on machining subject matter.
* Ability to meet deadlines.
* Familiar with CNC Mastercam or other manufacturing and design software.
* Precision and ability to pay attention to detail.
* Familiarity with industry codes and regulations.
* Able to lift up to 49 lbs.
* Familiar with lifting equipment for lifting over 49 lbs.
Pay rate $30.00-33.00/hr
*Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc.
Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible.
Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP).
Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please email or call
Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.
Volt is acting as an Employment Agency in relation to this vacancy.
Volt is immediately hiring a Machinist for Vista, Ca.
Machinist
1st 4:00 a.m. to 12:30 p.m
$30.00-33.00/hr
As a Machinist you will:
• Read blueprints - joints, material size and type, finishes, symbols, weld call outs, significance, tolerances, and special call outs.
• Set up chuck, vise(s) and/or fixture for holding work on machine.
• Compiling, coding, categorizing, calculating, tabulating, auditing, or verifying information or data.
• Accurately document program, set-up, run time, and total time to Travelers.
• Utilize specific, backed-up folders for storing program data.
• Successfully and appropriately use pneumatic tools - 90-degree mini grinder, straight mini grinder.
• Use a micrometer when measuring.
• Set up and operate lathes or mills, keep machines/work areas clean and clutter-free.
• Stay aware of square, perpendicularity, parallelism, flatness, and tolerances when setting up parts or weldments.
• Use Dial Calipers, Machinist's Square, Combination Square, 1-2-3 and/or 2-4-6 blocks, Tape Measure
• Monitor and review information from materials, events, or the environment to detect or assess problems.
• Responsible for demonstrating concern for the safety of self and others.
• Carefully stay within Blueprint tolerances (Typically .010" to .030")
• Deburr all parts coming off the machine and before handing it off to another department.
• Safely Use electric tools - 4" grinder, 8" grinder, drill press, hand drill, sanders, pedestal grinders, and hone tools.
• Use CNC codes to operate machines.
This is afull time opportunity
The ideal candidate will have:
• High School Diploma/GED required for the position.
• Safety protocol experience.
• 5+ years of experience running CNC mills / lathes.
• Experience and use of Zimmermann FZ-35 5-axis CNC bridge mill with Heidenhain control interface.
• Experience and use of DMG Mori NLX 2500/1250 with live tooling and secondary spindle.
Preferred experience:
• 10+ years of machining in a manufacturing environment.
• Experience working on a variety of projects while being adaptive.
• Able to read, write, and count accurately to complete all documentation.
• Proficiency in various machining materials, including but not limited to carbon steel, alloy steel, and stainless steel.
• Demonstrated ability to learn new skills and follow written procedures.
• Competence in operating CNC machines, bench sanders and grinders, lathes, mill machines, band saw, and cold saw.
• Experience working with 1/16" - 4" thickness plate, up to 12" Diameter or 12" Square Bar or tubing.
• Able to mount cutting tools per CNC programs/instructions.
• Strong capability of using practical judgment.
• Demonstrates initiative, high motivation to excel, self-starter, and adaptability.
• Experience using pneumatic, electrical, and hand tools.
• Be courteous of others, including input on machining subject matter.
• Ability to meet deadlines.
• Familiar with CNC Mastercam or other manufacturing and design software.
• Precision and ability to pay attention to detail.
• Familiarity with industry codes and regulations.
• Able to lift up to 49 lbs.
• Familiar with lifting equipment for lifting over 49 lbs.
Pay rate $30.00-33.00/hr
•Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc.
Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible.
Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP).
Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please email or call
Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.
Recommended Skills
- Attention To Detail
- Auditing
- Blueprinting
- Cad
- Curiosity
- Machinery
Help us improve CareerBuilder by providing feedback about this job: Report this job
Job ID: 439008
CareerBuilder TIP
For your privacy and protection, when applying to a job online, never give your social security number to a prospective employer, provide credit card or bank account information, or perform any sort of monetary transaction. Learn more.
By applying to a job using CareerBuilder you are agreeing to comply with and be subject to the CareerBuilder Terms and Conditions for use of our website. To use our website, you must agree with the Terms and Conditions and both meet and comply with their provisions.