COMPOSITE FABRICATOR with Security Clearance

Duties SUMMARY OF DUTIES: The purpose of this position is to assist a higher-graded worker to accomplish inspection, repair, modification, removal, installation, troubleshooting, and data documentation Low Observable (LO) systems and structures
Incumbent receives on-the-job experience and training to progress to the full performance level PD: D2503000(WG-4352-10).
• Performs basic repairs and maintenance with minimum instruction from a composite fabricators in performing repair and maintenance of LO coatings and structural systems.
• Performs basic repairs and maintenance with minimal instruction from higher graded Composite Fabricators to repair and maintain composite, advanced composites, metal and thermoplastic aircraft structures.
• Performs basic repairs and maintenance with minimal instruction from higher graded Composite Fabricators to repair, apply, and maintain corrosion preventatives and paints on aircraft, powered, and non-powered AGE.
• Performs other duties as assigned
Details of the duties and responsibilities are contained in the applicable position description (D2502000) for the WG-07 position
All position descriptions can be obtained from the HRO
Requirements Conditions of Employment
• NATIONAL GUARD MEMBERSHIP IS REQUIRED
If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position.
• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a probationary period.
• Participation in direct deposit is mandatory.
• Submit all documents/application NLT midnight Eastern Standard Time.
• Must be in the grade of E-3 to E-5 Qualifications If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position
Ensure that the Questionnaire is completed on Application Manager
GENERAL EXPERIENCE: Experience or training demonstrating very basic working knowledge of the properties and characteristics of a number of composite and plastic bonding agents, such as fiberglass, Kevlar, PVC, graphite, film adhesive, silicones, epoxies, etc
and Low Observable (LO) material characteristics; a very basic working knowledge of sheet metal theory, methods and practices; knowledge of very basic shop mathematics to calculate proportions and amount of materials required in repairing or modifying components; knowledge of and skill in the use of basic hand and powered tools common to the bonding operations as well as those utilized in the sheet metal trade; knowledge of health hazards associated with maintenance as well as proper mitigation procedures i.e
PPE, decontamination, and housekeeping; and ability to learn new skills and apply them to work in this series
SPECIALIZED EXPERIENCE: Must have 12 months experience or training demonstrating a working knowledge of the properties and characteristics of a number of composite and plastic bonding agents, such as fiberglass, Kevlar, PVC, graphite, film adhesive, silicones, epoxies, etc
and LO material characteristics; working knowledge of sheet metal theory, methods and practices; knowledge of basic shop mathematics to calculate proportions and amount of materials required in repairing or modifying components; knowledge of and skill in the use of basic hand and powered tools common to the bonding operations as well as those utilized in the sheet metal trade; knowledge of health hazards associated with maintenance as well as proper mitigation procedures i.e
PPE, decontamination, and housekeeping; ability to examine parts and items to locate defects; estimate the amount of adhesive filler needed for a repair by approximating the depth, length, and width of the damaged area in inches and then estimating the amount of filler in grams; ability to repair irregularly shaped LO and composite materials that have been damaged; ability to bond LO material, composites, and metals
PHYSICAL EFFORT: Works long periods of time exerting self when bending, shaping, or constructing complex items
Duties regularly require extended periods of walking, climbing, standing, or bending while performing inspections or tedious repetitive maintenance tasks
Work may require prolonged tiring and uncomfortable positions
The worker may be required to lift heavy equipment and components weighing up to 50 pounds and with assistance up to 100 pounds
WORKING CONDITIONS: Majority of work performed is conducted in a typical aircraft maintenance facility
Periodic outside work is required to be performed on an active aircraft flight line without fall protection, subject to exposure to elements of weather
The individual is frequently exposed to potentially dangerous environments to include operating engines, hazardous noise, stored energy, RF radiation, and hazardous chemicals
The use of appropriate clothing or personal protective equipment and strict adherence to work procedures is required to safely perform maintenance duties
Wear of full-face respirators, protective suits, rubber gloves, hearing protection, and other PPE is required
Wear of steel-toed boots is mandatory
Incumbent works with hazardous/toxic chemical products such as paints, solvents, strippers, and adhesives, creating hazardous/flammable wastes and dust
Maintains compliance with established performance and safety standards and recommends work stoppage when hazards exceed the typical work environment
The worker is subject to any shift and irregular tours of duty
CONDITIONS OF EMPLOYMENT & NOTES: 1
Must be able to obtain and maintain the appropriate security clearance of the position
2
This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968
An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position
3
Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission
4
Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day
5
The duties and responsibilities of your job may significantly impact the environment
You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission
MILITARY TECHNICIAN COMPATIBILITY POSITION: Prior to placement in this position, the selected applicant must be assigned to an appropriate military position and must meet the definition of a dual status technician in accordance with 32 U S C 709
Education There are no education requirements for this position
NOTES TO CANDIDATES: a
Situations of inversion of military rank are not permitted, i.e., a military technician may not be militarily senior to his or her full-time supervisor
b
Authorization for payment of PCS expenses will be granted only after determination is made that payment is in the best interest of the Hawaii National Guard
c
In addition to your application, documents of last performance appraisal, past civilian performance, letter of recommendations, and or military performance may be submitted
d
Candidates may be screened and evaluated on military attributes directly related to the compatible military position required to be assigned into, such as, but not limited to, military bearing, leadership, or ability to work with others (teamwork) in a military environment
e
Include any volunteer work experience in your resume
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social)
f
Final selection will be based upon qualifications, suitability, and available manpower resources
g
This employer will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization
h
Financial Suitability - It is the policy of the government not to deny employment simply because an individual has been unemployed or has had financial difficulties that have arisen through no fault of the individual
Information about an individual's employment experience will be used only to determine the person's qualifications and to assess his or her relative level of knowledge, skills, and abilities
Although an individual's personal conduct may be relevant in any employment decision, including conduct during periods of unemployment or evidence of dishonesty in handling financial matters, financial difficulty that has arisen through no fault of the individual will generally not itself be the basis of an unfavorable suitability or fitness determination
i
Candidates above the grade of E-5must include in their application the willingness to take a voluntary downgrade in order to be considered
j
Eligibles on this list will be given automatic consideration for position vacancies occurring during the six months period following the close of this announcement
k
This temporary limited appointment may be converted to a non-temporary appointment without further competition.